|
[China]
Trade Verify
Address: No. 368 Youyi St. Shijiazhuang, Hebei, China
Contact name:Maria Lee
SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department) |
|
Verified Suppliers
|
|
Polished Stainless Steel Food Grade Seamless Steel Pipe For Sanitary use
Food grade stainless steel tubings pipes are made in stainless steel ASTM A270 304 and 316L with outside and inner polished
to meet the requirement of high purity hygienic requirment, we also provide othergrade too such as hastelloy C22,
316TiTitanium and nickel alloy etc. the sanitary tubes/ pipes are widely used in food, beverage, beer, winery, pharmacy, cosmetics etc
The Polishing Opinion as below:
Mechanically is available to meet your high quality requirement on the surface of sanitary tubings. Outer and Inner surface can be treated complied to specified needs
Product Information/Product Description/Basis Information/Specification
| Name | POLISHED STAINLESS STEEL FOOD GRADE SEAMLESS PIPES |
| Size | DN: Seamless:10-914mm 3/8"-36" |
| Thickness | Wall Thickness: SCH5S, SCH10S SCH10 SCH20 SCH30 STD SCH40S , SCH40, SCH80S, SCH80, SCH60 XS SCH100 SCH120S SCH120 SCH140 SCH160 XXS 2mm-120mm Accept customization |
| Length | Single random length/Double random length/Fixed Length 5m-14m,5.8m,6m,10m-12m,12m Accept customization |
| Surface Treatment | Annealed, acid pickling or polished. |
| Material | Stainless steel: SS304, SS304L, SS304H, SS321, SS316, SS316L,
SS310S, 904L, Dual grade SS304/304L, SS316/316L
Stainless steel pipes with material of 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.4571, 1.4878, 1.4432, 1.4462
|
| Standard | AASME, ASTM, MSS, JIS, DIN, EN * American ASME B36.10M, ASTM, API 5L, API 5CT * Japanese JIS * German DIN * Chinese GB * BS standard |
| End | Plain end/Beveled, protected by plastic caps on both ends, cut square, grooved, threaded and coupling. |
| Applications | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
| Packing | wooden case, pallet , bundles or as customers' requirement |
| Shipment | By 20GP/ 40GP containers, by loose Containers LCL; bulk vessels, top open containers |
Features /Characteristics
Technology/ Technical Data Sheets
| Thickness List for seamless stainless-steel pipes | ||||||||
| UNIT:MM | ||||||||
| Norminal Pipe Size DN (in) | Outside Dimeter D | Norminal Wall Thickness | ||||||
| Sch5s | Sch10S | Sch40s | Sch40 | Sch80s | Schl20 | Sch160 | ||
| 1/8 | 10. 3 | —— | 1. 24 | 1. 73 | 1. 73 | 2. 41 | —— | —— |
| 1/4 | 13. 7 | — | 1. 65 | 2. 24 | 2. 24 | 3. 02 | — | — |
| 3/8 | 17. 1 | — | 1. 65 | 2. 31 | 2. 31 | 3. 20 | — | — |
| 1/2 | 21. 3 | 1.65 | 2. 11 | 2. 77 | 2. 77 | 3. 73 | —— | 4. 78 |
| 3/4 | 26. 7 | 1.65 | 2. 11 | 2. 87 | 2. 87 | 3. 91 | —— | 5. 56 |
| 1 | 33.4 | 1. 65 | 2. 77 | 3. 38 | 3. 38 | 4. 55 | — | 6. 35 |
| 1 1/4 | 42. 2 | 1.65 | 2. 77 | 3. 56 | 3. 56 | 4. 85 | — | 6. 35 |
| 1 1/2 | 48. 3 | 1.65 | 2. 77 | 3. 68 | 3. 68 | 5. 08 | —— | 7. 14 |
| 2 | 60. 3 | 1. 65 | 2. 77 | 3. 91 | 3. 91 | 5. 54 | —— | 8. 74 |
| 2 1/2 | 73. 0 | 2. 11 | 3. 05 | 5. 16 | 5. 16 | 7. 01 | — | 9. 53 |
| 3 | 88. 9 | 2. 11 | 3. 05 | 5. 49 | 5. 49 | 7. 62 | — | 11. 13 |
| 3 1/2 | 101. 6 | 2. 11 | 3. 05 | 5. 74 | 5. 74 | 8. 08 | —— | —— |
| 4 | 114. 3 | 2. 11 | 3. 05 | 6. 02 | 6. 02 | 8. 56 | 11. 13 | 13. 49 |
| 5 | 141. 3 | 2. 77 | 3. 40 | 6. 55 | 6. 55 | 9. 53 | 12. 70 | 15. 88 |
| 6 | 168. 3 | 2. 77 | 3. 40 | 7. 11 | 7. 11 | 10. 97 | 14. 27 | 18. 26 |
| 8 | 219. 1 | 2. 77 | 3. 76 | 8. 18 | 8. 18 | 12. 70 | 18. 26 | 23. 01 |
| 10 | 273. 1 | 3. 40 | 4. 19 | 9. 27 | 9.27 | 12. 70 | 21. 44 | 28. 58 |
| 12 | 323.9 | 3. 96 | 4. 57 | 9. 53 | 10. 31 | 12. 70 | 25. 40 | 33. 32 |
| 14 | 355. 6 | 3. 96 | 4. 78 | — | 11. 13 | — | 27. 79 | 35. 71 |
| 16 | 406. 4 | 4. 19 | 4. 78 | —— | 12. 70 | —— | 30. 96 | 40. 49 |
| 18 | 457. 2 | 4. 19 | 4. 78 | —— | 14. 27 | —— | 34. 96 | 45. 24 |
| 20 | 508. 0 | 4. 78 | 5. 54 | — | 15. 09 | — | 38. 10 | 50. 01 |
| 22 | 558. 8 | 4. 78 | 5. 54 | — | — | — | 41. 28 | 53. 98 |
| 24 | 609. 6 | 5. 54 | 6. 35 | —— | 17. 48 | —— | 46. 02 | 59. 54 |
Welded stainless steel with single Longitudinal Welded seam and double Weld seam
Size range from 1/2” to 48” DN15-DN1200.
The reference Standard for the stainless pipes
ASTM A312/A312M, ASME SA312/SA312M for Seamless Austenitic Stainless-Steel Pipes:
ASTM A269, ASME SA269 for Seamless Austenitic Stainless-Steel Tubing for General Service
ASTM A213/A213M, ASME SA213/SA213M for Seamless Austenitic Alloy-Steel Boiler, Super Heater and Heat-Exchanger Tubes
ASTM A789 / A789M. Seamless Duplex Stainless Steel Tubing for General Service.
ASTM A790 / A790M for Seamless Duplex Stainless Steel Pipes
ASTM A511 for Seamless Stainless Steel Mechanical Tubing
EN 10216, DIN 17456, 17458 for Seamless Stainless-Steel Tubes for Pressure Purposes
选用:Material Grades:
Stainless steel is the abbreviation for stainless and acid resistant steel. Steel that is resistant to weak corrosive media such as air, steam, water, or has rust resistance is called stainless steel; And the steel grade that is resistant to chemical corrosion media (such as acid, alkali, salt, etc.) corrosion is called acid resistant steel.
The most common used material is SS304/304L, SS316/316L, DUPLEX SAF2507, SAF2205, Detail’s specification of the material as below.
| 304/304L (UNS S30400/S30403) | |||||||
| Chemical Composition% | |||||||
| C | Cr | Mn | Ni | P | S | Si | |
| ≤ | -- | ≤ | -- | ≤ | ≤ | ≤ | |
| 0.035 | 18.0-20.0 | 2.00 | 8.0-13.0 | 0.045 | 0.03 | 1.00 | |
Tensile Strength: ≥ 485 Mpa (70KSI)
Yield Strength: ≥170Mpa (25KSPI)
Elongation ≥ 40%
316/316L (UNS S31600/S31603) | |||||||
| Chemical Composition% | |||||||
| C | Cr | Mn | Mo | Ni | P | S | Si |
| ≤ | -- | ≤ | -- | ≤ | ≤ | ≤ | |
| 0.035 | 16.0-18.0 | 2.00 | 2.0-3.0 | 10.0-14.0 | 0.045 | 0.03 | 1.00 |
Tensile Strength: ≥ 485 Mpa (70KSI)
Yield Strength: ≥170Mpa (25KSPI)
Elongation ≥ 40%
SAF2205 (UNS31803)
Chemical Composition%
| C≤ | Si ≤ | Mn≤ | P ≤ | S ≤ | Cr | Ni | Mo | Cu | N |
| 0.03 | 1.0 | 2.0 | 0.03 | 0.02 | 22-23 | 4.5-6.5 | 3.0-3.50 | / | 0.14-0.2 |
Mechanical Performance
| Test Items | Test Temp. | Performance | Standard Data |
| Tensile Strength | Room Temp. | Yield Strength s≥ | 450 Mpa |
| Tensile Strength h ≥ | 620 Mpa | ||
| Elongation % > | 25 | ||
| Reduction of Area=> | / | ||
| Impact Value KV(J) | Room Temp. | Lateral | / |
| Brinell hardness | Room Temp. | ≤ | 290 |
| Rockwell hardness | Room Temp. | ≥ | / |
SAF2507(UNS32750)
Chemical Composition%
| c ≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr | Ni | Mo | Cu≤ | N |
| 0.03 | 0.8 | 1.2 | 0.03 | 0.015 | 24-26 | 6.0-8.0 | 3.0-5.0 | 0.5 | 0.24-0.32 |
Mechanical Performance
| Test Items | Test Temp. | Performance | Standard Data | |
| Tensile | Room Temp. | Yield Strength | Ø≤55 Rm≥ | 550 Mpa |
| Ø >55 Rm≥ | 515 Mpa | |||
| Tensile Strength | Ø≤55 R0.002 ≥ | 800 Mpa | ||
| Ø >55 R0.002≥ | 760 Mpa | |||
| Elongation A%(4D) > | Ø≤55 ≥ | 15 | ||
| Ø >55 ≥ | 15 | |||
| Brinell hardness HB | Room Temp. | Ø≤5 ≤ | 310 | |
| Ø >55 ≤ | 310 | |||
Production Process
Application/Usage
Stainless steel pipe and tubing are used in chemical plants, aviation fields, marine equipment, cryogenic transportation, medical and architectural industries.
- Chemical plants
- Aviation fields
- Marine equipment
- Cryogenic transportation
- Medical & architectural industries
FAQ/ Customer Question and Answers
Q: What is difference between tubes and pipes?
A: Tubes and pipes are difficult to identify occasionally and some people use the name of tube and pipe interchangeably. However, there are significant differences between tubes and pipes. Tubes are measured in outer diameter and wall thickness. The tube is produced with close tolerance range and requires precise outer diameter and wall thickness to identify its working pressure.
Q: What is Difference Between Stainless Steel Pipes Seamless and Welded?
A: 1) Strength: The main difference between seamless and welded pipes is in their strength. Seamless pipes are stronger because they do not have any welded seams. Welded pipes are weaker because the welds can act as weak points that could break under high pressure.
2)Cost: Seamless stainless-steel pipes are more expensive than welded ones because they require more time and effort. Welded pipes are less expensive because they can be made quickly and with less precision.
3) Applications: Seamless stainless-steel pipes are typically used in high-pressure applications, such as hydraulic systems, while welded pipes are used in low-pressure applications, such as water piping.
Our Service
1. Technical support
2. Raw Material Quality control.
3. Inspection during the production time.
4. Final Test includes Surface, Dimension, PT Test, RT test, ultrasonic Test
5. Test Report each shipment
4. Flexible Delivery terms. EXW FOB CIF CFR DDP DDU
5. Flexible payment Ways: LC. TT. DP
6. Customized Package includes Logo. Cases Dimension.
7. 18 months quality Guarantee time.
9. Free replacement by air if any error founded
10. 24 hours to Feedback your questions
