Home Companies SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)

Products List

Contact Us

[China]

Trade Verify

Address: No. 368 Youyi St. Shijiazhuang, Hebei, China

Contact name:Maria Lee

SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Featured Products: Cl150 Cl300 Cl600 ANSI A105 Steel CS Welded Neck Flange, A105 ANSI ASME DIN Forged Steel Flange Carbon Steel Threaded Flange With NPT BSPT, Steel ANSI Socket Welded SW Flange With Pressure 150# 300# 600# 900# and more.

Cl150 Cl300 Cl600 ANSI A105 Steel CS Welded Neck Flange

ANSI A105 Steel CS Welded Neck Flange With Cl150 Cl300 Cl600 ANSI CS weldd neck Flanges (Raised Face Weld Neck Flange) are one of the most commonly used flanges in the piping ...

[Last Updated : 2024-04-11]

A105 ANSI ASME DIN Forged Steel Flange Carbon Steel Threaded Flange With NPT BSPT

ANSI ASME DIN A105 Carbon Steel Threaded Flanges With NPT BSPT The A105 threaded flange design (also called a 'screwed flange') uses a screw thread to connect the flange to a pipe. ...

[Last Updated : 2024-04-11]

A105 ANSI ASME DIN Forged Steel Flange Carbon Steel Threaded Flange With NPT BSPT

Steel ANSI Socket Welded SW Flange With Pressure 150# 300# 600# 900#

ANSI Steel Socket Welded SW Flange With Pressure 150# 300# 600# 900# Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength ...

[Last Updated : 2024-04-11]

150lbs 300lbs Forged Steel Flange ANSI Carbon Steel Blind Flange

ANSI Carbon Steel Blind Flange With 150lbs 300lbs Blind Flanges are characteristically produced without a bore. This is why a blind flange could be used across piping systems to ...

[Last Updated : 2024-04-11]

DIN EN1092-1 BS Forged Flat Face Slip On Flange With Golden Yellow Painting

DIN EN1092-1 BS Forged Slip On Steel Flange With Golden Yellow Painting European standard EN 1092-1 – concerning flanges for pipes – establishes the requirements for steel flanges ...

[Last Updated : 2024-04-11]

PN16 PN25 Forged Steel Flange Weld Neck Pipe Flange With Standard DIN BS UNI

PN16 PN25 Welding Neck Steel Flange With Standard DIN BS UNI PN16 Flange is designed to operated in pressure up to 16bar, and PN25 flanges is designed to operated in pressure up to ...

[Last Updated : 2024-04-11]

PN16 PN25 Forged Steel Flange Weld Neck Pipe Flange With Standard DIN BS UNI

ASME ANSI ASTM 900LBS Forged Carbon Steel Flanges With RTJ Face

ANSI ASME ASTM 900LBS Carbon Forged Steel Flange With RTJ Face Class 900LBS Flange are used for High pressure pipeline with working pressure of 150Bar, PN150. Its Dimensions are ...

[Last Updated : 2024-04-11]

ASME ANSI ASTM 900LBS Forged Carbon Steel Flanges With RTJ Face

ASTM ASME ANSI Forged Steel Flange Carbon Steel Hub Flange With RF Raised Face

ANSI ASTM ASME Carbon Steel Hub Flange With RF Raised Face Hub Slip-on flanges are easy to use in fabricated applications. These flanges are attached to the pipe by filler welding ...

[Last Updated : 2024-04-11]

ASTM ASME ANSI Forged Steel Flange Carbon Steel Hub Flange With RF Raised Face

ANSI 150LBS Steel Slip On Flange With ASTM B16.5

ANSI 150LBS Slip On Steel Flange With ASTM B16.5 Carbon Steel Slip On Flanges are flanges slipped over the end of pipes and then welded in place. Flanges are wide spread in low...

[Last Updated : 2024-04-11]

ANSI 150LBS Steel Slip On Flange With ASTM B16.5

DN15-DN2200 Forged Steel Flange MSS SP 44 ANSI Blind Flange With Golden Yellow Painting

MSS SP 44 ANSI Blind Flange With Golden Yellow Painting for large size MSS SP 44 flanges is for large size flanges covering NPS >26", equal to ASME B16.47 Series A flanges, MSS SP...

[Last Updated : 2024-04-11]

DIN BS4504 En1092-1 Forged Steel Flange UNI Screw Flange With NPT BSPT

DIN BS4504 EN1092-1 UNI SCREW FLANGE WITH NPT BSPT BS 4504 Flanges Section 3.1 : 1989 is a Circular Flanges that is made to be used in combination with either Fittings, Pipes or ...

[Last Updated : 2024-04-11]

ANSI Hub Lap Joint LJ Flange With ANSI CL150LBS 1/2''-88''

ANSI Hub Lap Joint LJ Flange With ANSI CL150LBS A lap-joint flange is a two-component assembly, with a stub end that has a lap-joint ring flange placed over it. The stub end is ...

[Last Updated : 2024-04-11]

Cl150lbs 300lbs Raised Face Forged Steel Flange With ANSI B16.5 MSS SP 44

Cl150lbs 300lbs Raised Face Forged Steel Flange With ANSI B16.5 MSS SP 44 Flanges with raised face, Sealing this type of flange face is accomplished by compressing a soft, flat, or ...

[Last Updated : 2024-04-11]

Forged Steel RF Blind Blank Flange With Anti Rust Oil

Forged Steel RF Blind BLank Flanges With Anti Rust Oil Blank flange, also known as blind flange, is actually called blind flange. It is a type of flange connection. It is actually ...

[Last Updated : 2024-04-11]

Forged Steel RF Blind Blank Flange With Anti Rust Oil

Zinc Coated Hot Dipped Galvanized LJFF Flange To Connect Stub Ends

Zinc Coated Hot Dipped Galvanized LJFF Flange To Connect Stub Ends LJFF flanges are crucial components when it comes to installing pipelines and pumps in various industrial ...

[Last Updated : 2024-04-11]

A105N C22.8 Forged Steel Flange With Sch40 Sch80 Customized

A105N C22.8 Forged Steel Flange With Sch40 Sch80 Customized Weld neck Flanges with SCH40 SCH80 means the flanges will connect/ weld pipes with thickness of SCH40 or SCH80 Schedule ...

[Last Updated : 2024-04-11]

DIN 2633 PN16 Forged Weld Neck Flange With Golden Color

DIN2633 PN16 Forged Weld Neck Flange With Golden Color DIN2633 flange size ranges from ½ inch (15 NB) to 48 inches (1200NB). Surface treatment for the DIN 2633 flanges dimension ...

[Last Updated : 2024-04-11]

High Pressure Forged Steel Flange 900lbs 1500lbs A105 With RTJ Face

High Pressure 900lbs 1500lbs A105 Steel Flanges With RTJ Face The Class 1500 Lb Flange, 900LBS Flanges Dimensions allow the flanges to hold 1500lbs/900LBS of force, It is equal to ...

[Last Updated : 2024-04-11]

3000# NPT High Pressure Elbow For Petro Gas Industry

3000# NPT High Pressure Elbow For Petro Gas Industry 3M is referring to 3000 lbs fittings, which can resist up to 3000 PSI (206 Bars) of pressure. 6M is referring to 6000lbs ...

[Last Updated : 2024-04-11]

45deg Elbow High Pressure Pipe Fittings With Threaded NPT 2000lbs 3000lbs

High Pressure 45deg Elbow With Threaded NPT 2000lbs 3000lbs Elbows: Such pipe fittings are used to change the direction of the flow. Elbows They are majorly available in two ...

[Last Updated : 2024-04-11]

45deg Elbow High Pressure Pipe Fittings With Threaded NPT 2000lbs 3000lbs

Page 3 of 13 : |< << 1 2 3 4 5 6 7 8 9 >> >|

Related Products