|
[China]
Trade Verify
Address: Nanfeng Town, Suzhou Jiangsu, China.
Contact name:Joanna
Zhangjiagang Lansin Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Product descrption
Automatic Pipe Bending Machine CNC tube bender CNC Pipe Tube Mandrel Bending Machine for car headrest
The high-speed automatic hydraulic pipe bending machine is a product developed by our company on the basis of absorbing foreign advanced technology. It is controlled by a single-chip microcomputer, hydraulically driven, man-machine dialogue operation, full voice operation prompts, simple setting input, manual, manual, Automatic arbitrary selection and automatic conversion. The mobile foot switch has two functions: start and emergency stop. High safety, with counting function, small pipe diameter can be bent and formed at one time. The performance of the whole machine is stable, and the pipe bending efficiency is high. It is an ideal equipment in the pipe processing industry.
1. Manual mode:Enter the manual operation screen, press the button beside the
action description to execute the corresponding actions. The end of
the action is determined by the set time, and it will be displayed
as "---in place!!!"
2. Semi-automatic mode:
Start to work after pedaling. In the working state, pedaling again
will pause the action. If you need to continue working, pedal
again. Press the stop button to stop working. A workflow requires
two pedals to complete. That is, the work starts once, and the
control is taken once.
3. Fully automatic mode:
Start to work after pedaling. In the working state, pedaling again
will pause the action. If you need to continue working, pedal
again. Press the stop button to stop working. A work process needs
to be completed with one foot pedal. I.e. work starts once
No. | Item | Description | |
Model | LS38 | LS50 | |
1 | Motor Power | 4KW | 5.5KW |
2 | Max. Size | Φ38X1.8T | Φ50X2T |
3 | Bending Radius | 38-200mm | 45-300mm |
4 | Double Bending Range | 170-1450mm | 190-1650mm |
5 | Max. Bending Angle | 1850 | 1850 |
1. When the machine is working, it is forbidden to enter its action
area.
2. The operator should stand within the reach of the emergency stop
switch.
3. This machine must be operated by a dedicated person
4. When the machine is malfunctioning, please turn off the power
5. Keep the machine and the environment clean
6. For safety, please turn off the power when installing the mold
7. Check the oil level of the oil standard before use, and keep the
position above 2/3 of the hydraulic oil standard
8. Place the machine on a solid ground and correct the level to
make the machine more stable
9. Check the steering of the motor, if the steering is wrong,
adjust the power supply wiring
10. When the machine is in automatic state, please confirm the
accuracy of the input data.
