Exhaust Pipe Bending Machine / Exhaust Tube Bending Machine /
Hydraulic Pipe Tube Bending Machine/pipe bender/tube bender
MAIN TECHNICAL SPECIFICATION FOR PIPE BENDING
MACHINE (CNC CONTOL SERIES)
Model | Bending Capacity (mm) | Max Bending Radius (mm) | Motor Power (Kw) | Videos (Scan code) |
SB-38CNC | OD 38.1 | R175 | 4 | |
SB-50CNC | OD 50.8 | R250 | 5.5 | |
SB-63CNC | OD 63.5 | R300 | 5.5 | |
SB--75CNC | OD 76.2 | R400 | 7.5 | |
SB--89CNC | OD 88.9 | R450 | 11 | |
SB--100CNC | OD 101.6 | R500 | 15 | |
SB--110CNC | OD 110 | R500 | 15 | |
SB--114CNC | OD 114.3 | R520 | 22 | |
SB--130CNC | OD 127 | R520 | 22 | |
SB--168CNC | OD 168 | R750 | 22 | |
SB--189CNC | OD 189 | R750 | 22 | |
SB--219CNC | OD 219 | R800 | 30 |
Exhaust Pipe Bending Machine / Exhaust Tube Bending Machine /
Hydraulic Pipe Tube Bending Machine/pipe bender/tube bender
Pipe Bending Machine / Exhaust Tube Bending Machine / Hydraulic
Pipe Tube Bending Machine/pipe bender/tube bender
Pipe Bending Machine / Exhaust Tube Bending Machine / Hydraulic
Pipe Tube Bending Machine/pipe bender/tube bender
Exhaust Pipe Bending Machine / Exhaust Tube Bending Machine /
Hydraulic Pipe Tube Bending Machine/pipe bender/tube bender
Automatic pipe bending machine is a kind of lightweight field
construction hydraulic machine used for pipe installation, which is
small and light, convenient movement, disassembly and other
characteristics.The following is an overview of the pipe bending skills of the
fully automatic pipe bending machine: Bend pipe skills:1. The machine tool must be well grounded and the wire shall not be
less than 4mm2 copper wire.It is not allowed to access the power
supply voltage beyond the specified range, can not live plug-in,
can not use the trillion-eu-euro meter test control loop, otherwise
it may be damaged.2. When plugging and pulling out the plug-in, the wire or cable
cannot be pulled to prevent welding and pulling out.3. The proximity switch and encoder cannot be hit with hard
objects.4. Display not cannot display unit with sharp objects.5. The electrical box must be placed in the ventilation place
without working in dust and corrosive gases.6. Do not install or change the pc input and output terminal
without permission.7. Re-confirm the motor steering when changing the power supply of
the machine tool.8. Automatic pipe bending machine should be kept clean, and
special attention should be paid to no foreign bodies in the
sliding grooves such as clamped blocks and sliders.9. Add lubricating oil to the chain and other sliding parts
regularly.10. The power supply must be disconnected during cleaning and
maintenance.11. Preparation before driving the automatic pipe bending
machine: check whether the oil level of the oil tank is to the oil
level line, each refueling, confirm the motor steering, check the
oil pump for abnormal sound, and check the hydraulic system for oil
leakage after starting up (the Angle encoder is not allowed for
refueling);12. Pressure adjustment: adjust the pressure with the
electromagnetic overflow valve to ensure that the system pressure
reaches the required working pressure, generally not higher than
12.5mpa.13. Mold adjustment for the pipe bending machcine: the mold of the
automatic pipe bending machine is set to the center with the clamp
block, and the clamp block can be adjusted by the bolt; the booster
block is set to the center with the mold, and tighten the bolt
after adjusting the center.FAQ1. What kind of pipe materials can bend?
Carbon steel, stainless steel, Aluminum, Copper pipes, tubes,
profile
Boil bank tubes bending
Condenser tubes bending
Wheelbarrow pipe bending
Exhaust pipe bending
Automobile pipe bending
Solid bar bending
Garage door profile bending
2. How to choose pipe / tube bending machine?
According following informtaion to choose pipe / tube bending
machine type:
1). Bending Pipe / Tube materials
2). Max. outside diameter of your bending pipe / tune
3). Wall thickness range of pipe / tune
4). Max. bending radius (CLR), if possible (general 1.5*OD)
5). Bending drawings or photos, samples if possible
3. Do you provide training to operation Mandrel Pipe Bender?
1). Will provide operatiing video and manual book with our pipe
bending machine.
2). Welcome your operators to our factory, we'll arrange everything
at our factory.
4. What about your Mandrel pipe bending machine main component?
1). PLC: Japan Mitsubishi
2). Servo motor: Japan Mitsubishi
3). Hydraulic system: Japan Yuken
4). Main Motor: Siemens
5). Electric parts: France
5. Any optional functions for Mandrel pipe bending machine
1). Servo motor for axis: 2axis(standard for CNC
type),3axis,4axis,5axis,6axis..
2). Control System: PLC(strandard) or IPC
3). Bending mould layer: single layer(standard) ,double
layers,triple layers and more.
4). Push bending function: V
5). Hole Punching function:E
6. What about your machine warranty?
One year warranty after machine reached customer's workshop.
And use famous brand components for long working lifespan.
7. What delivery time Mandrel for pipe bend machine?
Within 30 working days after received advanced payment. 
