Active Member
|
[China]
Address: No. 28 Datong Road, Xuguan Town, Suzhou New District, P. R. China, Suzhou, Jiangsu, China
Contact name:Kaisa
Bohyar Engineering Material Technology(Suzhou)Co., Ltd |
|
|
HS series of diesel hydraulic power units are mobile hydraulic power supply stations without connecting to the electric power. Our HS 36 can offer the strong and stable power without connecting to the electric power, very suitable for the field, factory working.
HS series of diesel hydraulic power units, can meet the requirements of various industries, such as: Petrochemical Plant, Power Station, Nuclear Power Station, , Boiler Plant, Refinery.
Diesel Hydraulic system uses imported gear pump. The output pressure is stable. It can increase the life of the tool, save the cost and improve the efficiency. The battery starts the diesel engine which drives the hydraulic pump. The hydraulic pump produces the high pressure hydraulic oil which drives the hydraulic motor to drive the load.
■ It uses step less speed variation. The equipment can achieve tool setting and adjustment in the case of low-speed.
■ It adopts compact design. The overall size and weight are compressed under the premise of ensuring the power, which can guarantee the stability of the machine and convenient transportation.
| Model | HS-36 |
| Drive mode | Diesel |
| Rated power | N=28KW(36HP) |
| Rated speed | n=2600 r/min |
| Rated pressure | P=15Mpa |
| Rated flow | Q=90L/min |
| Shipping dimensions | 1386x1200x1500(mm) |
| Shipping weight | 800kg |
■ HS-36 adopts one-piece structure, it is easy to move and makes the pipe connection easier with quick change connector.
■ The machine can work continuously within 40 ℃ temperature by the oil cooling system.
■ It can make starting, stopping and warming up function through a integrated control box.
■ With the double oil passages function, we can make drilling and cutting at the same time.
■ To ensure that users can quickly access we have the quick connector which can be plug and pull quickly.
■ Select the suitable oil passage and connect the hose between the operating valve block and the load. The fitting needs to be tightened to ensure no oil leakage, also connect the hydraulic hose to the hydraulic motor.
■ The machine needs to be heated when the ambient temperature is below 10 ℃. The hydraulic oil will be automatically heated at low temperatures. Just open the cabinet inside the inverter switch and push the switch to “On”, the system will automatically preheat for 15mins, then the cabinet heats up the indicator lamp which will always be on. The heat will be extinguished when the lamp is ended. At the same time, make sure the ball valve handle is in the OFF position, and then turn the start key to the START position to start the diesel engine. For more detailed diesel engine maintenance, please refer to the operating instructions of the diesel engine.
■ Turn the ball valve in the figure below slowly clockwise (the maximum rotation angle is 90 °) and observe the rotation speed of the load to reach the appropriate speed.
■ Oil cooler governor valve and relief pressure regulator has been adjusted before leaving the factory. It’s not necessary to operate in the use of the process. And only need to adjust the corresponding oil throttle valve to adjust the speed of the oil load.
■ When finished, turn the ball valve counterclockwise to position the ball valve handle and turn the control key to the OFF position to stop the engine.
