Active Member
|
[China]
Address: 3nd Floor 8th Building,R&D Area 1, No.699-8 Xuanwu Road, Nanjing.China ,210023
Contact name:Alex
Nanjing Photel Communication Technology Co.,Ltd. |
|
|
Brief Introduction
PT-50X Ethernet Over E1 Interface Converter supports the
transparent transmission of Ethernet data on 1~16 E1 channels. The
maximum bit rate is 31.68Mb/s. EOP-X adopts international standard
protocol (G.7041,G.7042,G.7043,G.8040) at the process for all
layers and able to inter communicate with third party device
followed same standard. The device does not only provide perfect
alarm/status indication for E1 and Ethernet, but with advanced
management function such as Ethernet data traffic statistics etc.
The device is with high integration, low power consumption, stable
performance and easy to use.
PT-50X Ethernet Over E1 Interface Converter adopts international
standard protocol at all levels, which can also communicate with
the similar product of other manufacturers.
Features
* Transmission over E1 interfaces;
* Auto adaptation of Ethernet data over 1~16E1;
* Auto-restore of E1 link after eliminating the failure;
* For 16E1 channels, the maximum tolerable time delay between links
can be up to220ms. It will have an alarm for exceed the limit when
the time delays over 220ms. E1 link comply with jitter tolerance
and jitter transfer characteristics of ITU-T G.823;
* 10/100BT Ethernet interface, provide4 maximum shared Ethernet
interfaces;
* Support VLAN based on interface, fully comply with IEEE 802.1Q
standard;
* Support frame length: minimum: 64 bytes, maximum: 1916 bytes;
* Provide statistics for each Ethernet interface, such as the fault
package number andtotal package number etc;
* Support hyper terminal or SNMP/WEB management;
* GFP-Fen capsulation complies to G.7041;
* VCAT and LCAS complies to G.7042;
* Ethernet to nxE1 mapping complies to G.7043;
* Ethernet to E1 mapping complies to G.8040;
* The Ethernet data will not be damaged if enlarge or reduce the
transmission bandwidth by means of network management;
* Asymmetric transmission supported, when a one direction of the E1
is failed, the other direction can still work;
* E1 channel will be cut off when in loop back and restore when
loop back is removed;
* Provides alarm indication, display local or remote optional;
* Support local E1 circuit loop back function, facilitate to test
E1 circuits;
Technical Specification
* 2M interface
Bit rate:2048Kbps ±50ppm
Code type: HDB3 code, conforming to G.703 standard
Input impedance: 75Ω (unbalanced interface) or 120Ω (balanced
interface) optional
Frame structure: Conforming to G.704, G.706
Compression law: Conforming to G.711
Level:±2.37V ±10%
* ETH interface (10/100M UTP)
Speed: 10/100Mbps, half/full duplex auto-negotiation
Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
Connector:RJ45
* Dimension and weight
Dimensions: 224mm(w)×148.2mm(h)×43.4mm(d)
Net weight: 3Kg
* Power Supply
Input voltage: Standard value DC-48V or AC220V
Voltage range: DC-36V to DC-72V, AC176V~AC264V
Power consumption: <5W
* Operation Environment
Working temperature: -10°C ~ 50°C
Working Humidity: 5% ~ 95% (no condensation)
Application
We have been the professional manufactuer of PDH, PCM ,SDH,PBX
etc.communication equipment for more than 15 years.
1.We provide OEM and ODM service.
2.We provide peoducts for military
3.We acceppt customer Oriented Equipment
4. Photel productsenjoy high quality and competitive price!
Welcome to Photel
PCB soldering process
Exhibition
Products show
♦Payment
1.T/T by bank is our preferable payment method.
2.We also accept different payments,such as L/C, Western Union or
as your demand.
3.We will send you our bank information in the PI, please note.
♦Shipment
1.Lead time based on our strong production capacity,normally one
product can be ready within 1-3 days, if the quantity of the order
is more than 500pcs,maybe we need a little more time.
2.Big order could be by sea or air.
3.We will send you in 3-5days after the full payment has been
confirmed.
4.please provide your information:contact person name,company
name,address,post code and telephone number in the PI.
♦Warranty
1.All products have been checked and packed in good condition after
our serious QC test. If you have any question, please feel free to
contact us, we would get it solved in limited time and our service
would make you trust us.
2.Our equipment provide two years warranty, after two years you can
renew the warranty.
♦Feedback
1.Hope we can have a long term cooperation.
2.We answer all your inquiries in 8hours or less guaranted,if you
have any question about communication product please contact us.
3.If need our technical section will design solution for you.
4.We own the best after-sale service, our team will do our best to
solve for customer when have any problem happen.
♦Contact us
E-mail:zyq@photel.com.cn
SKYPE:+8617712860139
