Suzhou Delfino Environmental Technology Co., Ltd. |
Verified Suppliers
|
|
45g/L RS485 Suspended Solids Sensor with brush for Waste Treatment
The sludge concentration sensor MLSS32 adopts the optical method,
and the material used is corrosion-resistant and
pollution-resistant, so that it can work stably for a long time in
harsh environments. Sensors require regular calibration and
maintenance to maintain accurate measurements. The sensor should
have a certain anti-interference ability to prevent the measurement
results from being affected by external factors (such as
temperature and pressure changes). The sensor supports digital
output and communication interface for integration with other
devices and remote transmission and management of data.
Sludge concentration sensors play an important role in
environmental protection, resource utilization and industrial
production.
Wastewater treatment: In wastewater treatment plants, sludge concentration sensors can
be used to monitor the sludge content during treatment to ensure
treatment effectiveness and compliance with discharge standards.
Environmental monitoring: Sensors can be used to monitor the sludge concentration in natural
water bodies, providing data support for water quality assessment
and environmental protection.
Industrial process control: In some industrial processes, it is necessary to control the
sludge concentration in the water body to ensure the smooth
progress of the production process.
Resource recovery: Sludge may contain recyclable materials, and
sensors can help determine when and how to collect these resources.
Specification:
Model | MLSS300 (no wiper) MLSS301 (with wiper) | MLSS310 (no wiper) MLSS311 (with wiper) | MLSS320 (no wiper) MLSS321 (with wiper) |
Measuring Principle | Infrared scattered light method | ||
Measuring Range | 0.01-20g/L | 0.01-45g/L | 0.01-120g/L |
Accuracy | Less than 5% of the measured value | ||
Resolution | 0.01g/L | ||
Response Time | T90<60s | ||
Calibration | Factor calibration, multi-point calibration | ||
Communication | RS485, Modbus-RTU | ||
Work Pressure | ≤4bar | ||
Work Temp | 0~50℃ (does not freeze) | ||
Storage Temp | -10~60℃ | ||
Flow Rate | Not dependent | ||
Power Supply | 12V DC | ||
Dimensions | Diameter 65mm * Length 270mm | ||
Installation | Horizontal installation, special 90° installation accessories | ||
Material | Body: PVC(Standard)SUS316L/ T i(option) / POM | ||
Protection Grade | IP68 | ||
Cable | Standard 10 meters | ||
Weight | 800g | ||
Power Consumption | 1.5W |
Please click the user manual of Suspended Solids sensor here:
Brief introduction:
Aplication:
◇Soil remediation and pollution control
◇Bioenergy and Resource Recovery
◇Industrial Waste Treatment
◇Architecture and Construction
◇Academic Research
◇Wastewater treatment plant
◇ Waterworks
◇ Surface water
◇Semiconductor
◇Environmental water treatment
◇ Paper industry
◇ Mining
◇ Metallurgical Electronics