Black Seed Oil Extraction Machine Industrial Distillation Equipment
Main process of Herbal Extraction Equipment
Model | SED-0.5/125TN |
The volume of extracting (m³) | 0.5 |
The work temperature of extracting and concentrating (°C) | Water: 50-90°C Alcohol: 40-80°C |
Raw Material Input Capacity (kg) | 50-70 |
Capacity of Concentrating Evaporator | 100kg-125kg/hour |
Steam Consumption | 280kg/hour |
Water Circulation Capacity | 15-25T |
Power of Vacuum Pump | 3.5kw |
The time of extraction (h) | 6-8 |
Concentrate density (%) | 1.2-1.35 |
Product Description of Herbal Extraction Equipment
Main process for palm oil press machine
1.Raw materials storage section:
Fresh palm fruit bunch must be first measurement recorded by the
pound into the plant, then unloaded to loaded fruit slopes and
stored.
2.Sterilizing section:
The fresh palm fruit bunch are airtight sterilized in
sterilizer.The purpose to prevent enzymes broken down, avoiding FFA
content in oil further increase; pretreatment peel, prepared for
the follow-up processing; pre-conditioning stone, reducing the
damage kernel.
This process adopts the different type Boiling vessel for
sterilizing the palm fruit. If for small cacpacity ,it directly use
waste palm branch or wood for the fuel to reduce down the cost.
3.Threshing section:
The purpose of threshing is the oil palm fruit be separated from
the fruit bunch through strong vibration, Threshing equipment is
revolving drum thresher. The oil palm fruit separated be ejected
then into the press section. Empty fruit bunch be ejected to the
yard from the other side of the revolving drum, or shipped out from
the plant as palm orchards slipcover to recycling use, or burning
in the locale as fertilizer for agricultural land.
4.Digester & Pressing section:
Oil palm fruit first carry out cooking before pressed, fruit
sterilized must be pre-heating for the soft- pulp, and damage pulp
cell structure. Then enter into continuous screw press for
pressing.Oil palm fruit pressed is divided into two parts: oil,
water, solid impurities mixture and the press cake (fiber and
nuclear). Oil, water, solid impurities mixture by the crude oil
gutter inflow to oil purification section; press cake by breaking
screw conveyor into the fiber- recovery section.
5.CPO Clarification section:
Directly use vertical screen to remove out the sludge ,then use
plate filter to remove out the gums from the crude palm oil ,to get
the good quality CPO .
this process does not use any water .
6.Finished oil storage and transportation section:
Finished crude oil is stored in storage tanks, the capacity of oil
storage tank is two 1000 tons, serve oil shed loading and issuing
regularly oil to outside. Finished crude oil generally be stored
and transported between at 32 ºC to 40 ºC, in order to prevent
overheating, the working temperature of the palm oil should be at
50 ºC to 55 ºC.