|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
Product Description of Capsule filling machine
The machine is an intermittent motion and the hole-plate type
filling fully automatic capsule filling equipment. It adopt
optimization design combined the characteristics of Chinese
medicine and the requirement of GMP, it has the characteristics of
compact mechanism, small volume, lower noise, precision filling
dosage, multi-function, running stably etc.
It can finish the following motion at same time: capsule feeding,
capsule separating, powder filling, capsule rejecting, capsule
locking, finished capsule discharge and module cleaning etc.
Product Parameters of Capsule filling machine
| Equipment Model and Specification | SED-3200J | SED-3800J | |
| Technical Parameter | Machine weight | 2400kg | |
| Overall dimension | 1390 × 1300 × (2080+210) mm | ||
| Motor power | 6.37kw + 3kw (Dust Collector) | ||
| Power supply | 3 phase, AC 380V, 50Hz | ||
| Max. Output | 192000 capsules/h | 228000 capsules/h | |
| Capsule size | 00#~5# and safety capsule A~E | ||
| Capsule using rate | ≥ 99.5% | ||
| Noise index | ≤ 78dBA | ||
| Dosage difference | ≤ ±3% (under more than 300mg dosing and 40~80 mesh after granulation) | ||
| compressed air (for cleaning station) | air consumption 0.09m3/min pressure 0.3MPa | ||
| Water supply | Water cycle pump compound water tank, or meet water source | ||
| Vacuum degree | -0.02~-0.06 MPa | ||
| Water volume | 250L/hour | ||
| Enter pipe inner-diameter | 20mm | ||
| Waterspout inner-diameter | 40mm | ||
| Working temperature | 21ºC ± 3ºC | ||
| Working relative humidity | 40~55% | ||
| Exhaust capacity | 300m3/h | ||
| Special function | Granule and powder mixed filing; Powder collector | ||
| Control system | Stepless frequency conversion control, PLC control, with touch screen | ||
| Material | Spare part contact with medicine adopt superior S.S 304 & GMP compliable material | ||
| Criterion | Comply to GMP completely | ||
Feature of Capsule filling machine
1. The filling seat and the metering disc are integrated, so that
the metering disc and the filling rod will not be offset, avoiding
the friction between the filling rod and the metering disc,
improving the filling accuracy and prolonging the service life;
2. The automatic capsule filling machine has beautiful appearance,
fine craftsmanship, simple operation and convenient use;
3. The vacuuming, vacuuming habits and exhaust pipe are designed
inside the body to avoid the phenomenon of hardening, breaking and
air leakage of the trachea, which is convenient for the work
surface to be clear and meets the requirements of GMP;
4. The fully automatic capsule filling function can automatically
remove defective capsules, recover the drugs in defective capsules,
reuse them, and improve economic benefits;
5. The automatic capsule filling machine is simple and convenient
to disassemble and clean, and can exchange various types of molds,
and various molds can be exchanged on the same machine to meet the
requirements of different production capacities;
6. The filling rod nut is made of stainless steel instead of the
original plastic nut to avoid cracking; the working table has fewer
screws and nuts, which is easy to clean and makes the whole machine
more beautiful.
Product Show of Capsule filling machine
Application of Capsule filling machine
The automatic capsule filling machine is mainly used for filling
powder or pellet capsule medicines in medicine, hospital
preparation room, health care products and other industries.
