|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
Skincare Ointment Manufacturing Machine Hydraulic Lifting Vacuum Emulsifying Mixer
Product Parameters of Emulsifying Mixer
The SED-500RZ material are stirred by both the center blade and side scraper, which works on the inner surface of pot keeping stirring materials from being stuck onto the wall.
In the process of blade-stirring, the materials are continuously crushed, pressed, fold.
Then the material is sent to the cut-off mixing unit where they are again cut off, broken and stirring by the strong interaction between running cutting wheel and cutting sheath. The materials are finally crushed into small pellets of 200um~2um
Product Parameters of Emulsifying Mixer
| Model No.: | SED-1000RZ |
| Total volume | 1200L |
| Working volume | 1000L |
| Homogenizing motor | 15 kw |
| Rotating speed | 1000-4000 r/min |
| Frame and scrapper motor | 4 kw |
| Rotating speed | 20-60 r/min |
| Emulsifying tank kettle motor | 0.4 kw |
| Working volume of the oil pot | 500L |
| Oil pot mixing motor | 2.2 kw |
| Working volume of the water pot | 750 L |
| Water pot mixing motor | 2.2 kw |
| Water circulation vacuum pump (KW) | 4 kw |
| Working pressure of the jacket | 0.25 MPa |
| Working pressure of tank | ≤0.09 MPa |
| Pressure of Compressed air | 0.6-0.7 MPa |
| Air compression consumption | 0.5 m3 /batch |
| Water consumption for jacket | 1.0 m3 /batch |
| Water consumption for cleaning | 0.8 m3 /batch |
| Hydraulic motor | 1.5 kw |
| Total power | 35 kw |
Advantages of Emulsifying Mixer
1. The materials are sucked into emulsifying pot by transportation pipe under the vacuum state, or it also can be put from the feed inlet.
2. The material are stirred by both the center blade and side
scraper, which works on the inner surface of pot keeping stirring
materials from being stuck onto the wall.
In the process of blade-stirring, the materials are continuously crushed, pressed, fold. Then the material is sent to the cut-off mixing unit where they are again cut off, broken and stirring by the strong interaction between running cutting wheel and cutting sheath.
The materials are finally crushed into small pellets of 200um~2um. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material.
3. The ex-circulating system can make the homogenizing more strong. The material within the pot can be give off only under the state of change direction of the control valves.
4. The temp controller on operation panel can adjust the temp of
the homogenizer pot; The homogenizer stirring and the blade
stirring cab be used simultaneously or dividedly;
The homogenizer stirring time can be set by the custom according to the different material. After finished the whole procession please rise the pot cover for the clearing.
Products Show of Emulsifying Mixer
Other Products We Manufacture:
3.Pharmaceutical Machinery Equipment
