Tangyin Taixing Engineering Plastics Co., Ltd. |
Verified Suppliers
|
|
HDPE Dock Fender
Face Pad Polyethylene Plastics Board Panel For Marine Fender
Resist Impact HDPE Plastic Marine Boat Dock Fender Face Front Pad
Plate Panel
Marine Fenders Pad is made from HDPE (High Density
Polyethylene) which has been used for years by marine manufacturers
worldwide. It’s an extremely durable material They're usually fixed
to the panel using stainless steel screws that are screwed into the
skin of the steel panels. High Density Polyethylene (HDPE) provides
a smooth surface for vessels to dock against.
PE Marine Facing Pads Advantages:
Low water absorption and not affected by temperature;
Light, anti-impact, corrosion resistance, anti-ultraviolet ray,
aging resistance, low friction, non-pollution, which is a good
material for fender face pad;
Stable chemical property and can endure the corrosion of all kind
of corrosive medium and organic solvent in a certain range of
temperature and humidity;
Superior impact resistant, noise-absorption and
vibration-absorption.
Product Specification:
Marine fenders typically operate as a group of single units where
the type, location and density of their installation or deployment
depends on several factors including their technical
specifications, berth structure, ship type, etc.
Product Name | HDPE Dock Fender Face Pad Polyethylene Plastics Board Panel |
Material | High DensityPolyethylene |
Size
| |
Thickness | 5-200 mm |
Density | 0.94-0.98 g/cm3
|
Water Absorption | <0.01% |
Impact Strength | |
Compressive Strength | ≥42 Mpa |
Friction coefficient | 0.11-0.17 |
Ship fender panels are processed from ultrahigh molecular weight
polyethylene (UHMWPE) material, which has an extremely low
coefficient of friction and excellent wear resistance, uv and ozone
resistance, corrosion resistance and will not rot or crack when
soaked in water for a long time.
Application:
Because of the advantages, HDPE plastic Fender Panel is widely used in the world’s major ports and
wharves.
1. Ships in the harbor
2. Chafing plate
3. Trucks drive piles first
4. Floating wharf
5. Slide the wall fender
6. Protection of quaywall
7. Protection of piles
FAQ:
1. Q: Are you a manufacturer or a trading company?
A: We are one of the leading PE manufacturer in China for more than
20 years.
2. Q: How long can I get the latest price?
A: We usually quote within 12 hours after we get your inquiry.
3. Q: What is your mainly products
A: UHMWPE/HDPE outrigger pads, HDPE ground protection mats, UHMWPE
sheet, PE chopping board, UHMW PE belt conveyor roller, UHMWPE
fender.
4. Q: Do your factory inspect the finished products?
A: Yes. Each step of products and finished products will be carried
out inspection by QC department before shipping.
5. Q: How can I get sample from you
A: Just send your requirement and we will send you the samples
accordingly by DHL,UPS,TNT or others