Tangyin Taixing Engineering Plastics Co., Ltd. |
Verified Suppliers
|
|
UHMWPE Plastic Dock Cone Ship Fender Panel Board For
Harbour Boat Protection Pads
Impingement plate is in a structure with the inclined periphery and
the circular arc double turning corners in the transition fit. It
can reduce the friction force between a ship body and the surface
of the rubber fender, reduce the surface pressure exerted on a ship
side board, reduce the mooring shearing force, and improve the
service life of the PE fender.
PE Marine Fenders Advantages:
PE Marine Fenders Facing Pad provide the benefits of higher wear
resistance (even greater than steel) and lower maintenance; as they
do not split or rot and are fully resistant to infestation from
marine borers.
The low friction coefficient and high abrasion resistance of UHMWPE provides an ultra smooth surface for the vessel to slide
easily along the face of the fenders.
Product Specification:
Marine fenders typically operate as a group of single units where
the type, location and density of their installation or deployment
depends on several factors including their technical
specifications, berth structure, ship type, etc.
Product Name | Plastic Dock Cone Ship Fender Panel Board For Harbour Boat Protection Pads |
Material | ultrahigh molecular weight polyethylene |
Size
| |
Thickness | 5-200 mm |
Density | 0.94-0.98 g/cm3
|
Water Absorption | <0.01% |
Impact Strength | |
Compressive Strength | ≥42 Mpa |
Friction coefficient | 0.11-0.17 |
PE Marine Fenders Facing Pad provide the benefits of higher wear
resistance (even greater than steel) and lower maintenance; as they
do not split or rot and are fully resistant to infestation from
marine borers.
The low friction coefficient and high abrasion resistance of UHMWPE provides an ultra smooth surface for the vessel to slide easily
along the face of the fenders.
Application:
Because of the advantages, UHMWPE plastic Fender Panel is widely used in the world’s major ports and
wharves.
1. Ships in the harbor
2. Chafing plate
3. Trucks drive piles first
4. Floating wharf
5. Slide the wall fender
6. Protection of quaywall
7. Protection of piles
FAQ:
1. Q: Are you a manufacturer or a trading company?
A: We are one of the leading PE manufacturer in China for more than
20 years.
2. Q: How long can I get the latest price?
A: We usually quote within 12 hours after we get your inquiry.
3. Q: What is your mainly products
A: UHMWPE/HDPE outrigger pads, HDPE ground protection mats, UHMWPE
sheet, PE chopping board, UHMW PE belt conveyor roller, UHMWPE
fender.
4. Q: Do your factory inspect the finished products?
A: Yes. Each step of products and finished products will be carried
out inspection by QC department before shipping.
5. Q: How can I get sample from you
A: Just send your requirement and we will send you the samples
accordingly by DHL,UPS,TNT or others