Active Member
|
[China]
Address: 29th floor room 15 No.5 Commercial building B block ,the 2nd section Wuchang Fu west,No.32 Wenzhi street,Hongshan district,Wuhan city,China
Contact name:
Hubei Nuojin Sen Technology Co.,Ltd |
|
|
UV curable marking ink white and black color for pcb and led industry use
| Items | Technical features | Notes |
| Color | White , Black | |
| Fineness | ≤8µm | 0 ~25µm Fineness gauge |
| Mixing ratio | Base/Hardener=23/2 | Weight ratio |
| Viscosity after mixing (25℃) | 250~450 dPa﹒s | VT-04F |
| Density after mixing (25℃) | 1.20 ~1.40 g/ml | |
| Screen mesh | 90 ~120T | |
| Film thickness | 12 ~16µm | After curing |
| Curing energy | 150℃ , 30 ~60min | Hot air circulation oven |
| Pot time after mixing | 24 hours | Store below 25℃ |
| Pencil hardness | ≥6H | Pencil hardness test |
| Adhesion | 100/100 | Laceration experiment |
| Insulation resistance | ≥1.0×108Ω | IPC-SM-840D 3.8.2 |
| Resistance to molten Tin | 288℃×10secends×3times OK | IPC-SM-840D 3.7.3 |
| Environment standard | In compliance with RoHS directives | SGS testing |
| Package | Base:920 g ; Hardener:80 g | According to customer requirements |
| Base:4.6 kg; Hardener:0.4 kg | ||
| Shelf time | 6 months since the date of manufacture | Store below 25℃ in dark |
Product introduction:
UV curable marking ink ,which also name uv curable character ink,with fast curing,good printing and after the solid color,font clear,good adhesion,heat resistance and electrical insulation.Apply to the board and fil on the character mark.
Technical guidance form is as below
| Specifications | |
| color | white,black |
| viscosity | 280-20dpa.s |
| adhesion | 100% |
| hardness | 4-6H |
| envirmental standards | comply with ROHS directive requirements |
| storage security | 25+5C,stored in a cool and dry condition for 6 months |
Operating parameters:
1. Open oil
After the ink is fully mixed to the mixing,stirring after the static 15min above,so that the ink viscosity stability in the use of ink use do not need to add a diluent,such as viscosity is too large,can be used as a special diluent debugging,but the amount can not be added more than 5%.(in order to make good adhesion to the substrate,the cleaning operation is preferred)
2. Screen printing
Screen printing:take 100-120T nylon diagonal net tension,23+1N
Rubber scraper scraping:65 degrees-75 degrees of good elasticity,sharp edges,squeegee angle of 5-20 degrees,2-6kg/cm-pressure
3. UV curing
Energy:800-1500mj/cm
Note:according to the different equipment,conveyor belt speed and energt have a greater difference,but should be completely cured ink is appropriate.
Matters needing attention:
This specification in all parameters and results for the company's test data,can only be done for early reference,as a guarantee and basis,pratical application to customers for the field test conditions and test results.
Our company:
Hubei Nuojinsen Technology Co.,Ltd ,after years of unremitting efforts,Combined with foreign advanced technology and process,Production of PCB ink has reached the technical level, conforms to the requirement of RoHS environmental protection directive, with excellent quality and excellent service is deeply trusted by customers.
