Active Member
|
[China]
Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China
Contact name:Wendy
Abis Circuits Co., Ltd. |
|
|
High Tg Lead Free HASL PCB Printed Circuit Board Fr4 1.6mm Thickness Circuit Board China Manufacturer
The 1.6mm double-layer PCB Circuit Board is 2 Layers, and it was made with FR - 4 board material, with 1 Oz / 35 µm copper thickness.
Also, the board size of this PCB Circuit Board is customized, with green solder mask and Immersion Gold surface treatment.
PCB Product Application:
1, Consumer Electronics: TV, DVD,Digital Caramer, air conditoner, Refrigerator,set-top box etc;
2, Security monitor: Moible phone, PDA, GPS, caramer monitor etc;
3, Telecom Communication :wireless LAN card, XDSL router,Servers, Optical Device,Hard Drive etc;
4, Industrial controls: Medical device ,UPS equipment, Control device etc;
5, Vehicle Electronices: Car etc;
6, Military & Defense : Military Weapons etc;
Printed Circuit Board Detail Specifications
| Layers | 2 |
| Material | FR-4 |
| Board Thickness | 1.6mm |
| Copper Thickness | 1oz/35um |
| Surface Treatment | HASL LF Immersion Gold |
| Soldmask & Silkscreen | Green&White |
| Quality Standard | IPC Class 2, 100% E-testing |
| Certificates | ISO14001, ISO9001, UL, cUL, TS16949 |
Our PCB Capacity
| Layers | 1~20 |
| Board Thickness | 0.1mm-8.0mm |
| Material | FR4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc |
| Max Panel Size | 600mm×1200mm |
| Min Hole Size | 0.1mm |
| Min Line Width/Space | 3mil(0.075mm) |
| Board Outline Tolerance | 0.10mm |
| Insulation Layer Thickness | 0.075mm--5.00mm |
| Out Layer Copper Thickness | 18um--350um |
| Drilling Hole (Mechanical) | 17um--175um |
| Finish Hole (Mechanical) | 0.10mm--6.30mm |
| Diameter Tolerance (Mechanical) | 0.05mm |
| Registration (Mechanical) | 0.075mm |
| Aspect Ratio | 16:01 |
| Solder Mask Type | LPI |
| SMT Mini. Solder Mask Width | 0.075mm |
| Mini. Solder Mask Clearance | 0.05mm |
| Plug Hole Diameter | 0.25mm--0.60mm |
| Impedance Control Tolerance | 10% |
| Surface finish | ENIG, OSP, HASL, Chem. Tin/Sn, Flash Gold |
| Soldermask | Green/Yellow/Black/White/Red/Blue |
| Silkscreen | Red/Yellow/Black/White |
| Certificate | UL, ISO 9001, ISO14001, IATF16949 |
| Special Request | Blind hole, Gold finger, BGA, Carbon ink, peelable mask, VIP process, Edge plating, Half holes |
| Material Suppliers | Shengyi, ITEQ, Taiyo, etc. |
| Common Package | Vacuum+Carton |
Our PCBA Capacity
| Capacity | |
| Single and double-sided SMT/PTH | Yes |
| Large parts on both sides, BGA on both sides | Yes |
| Smallest Chips size | 0201 |
| Min BGA and Micro BGA pitch and ball counts | 0.008 in. (0.2mm) pitch, ball count greater than 1000 |
| Min Leaded parts pitch | 0.008 in. (0.2 mm) |
| Max Parts size assembly by machine | 2.2 in. x 2.2 in. x 0.6 in. |
| Assembly surface mount connectors | Yes |
| Odd form parts: | Yes, Assembly by hands |
| LED | |
| Resistor and capacitor networks | |
| Electrolytic capacitors | |
| Variable resistors and capacitors (pots) | |
| Sockets | |
| Reflow soldering | Yes |
| Max PCB size | 14.5 in. x 19.5 in. |
| Min PCB Thickness | 0.2 |
| Fiducial Marks | Preferred but not required |
| PCB Finish: | 1. SMOBC/HASL |
| 2. Electrolytic gold | |
| 3. Electroless gold | |
| 4. Electroless silver | |
| 5. Immersion gold | |
| 6. Immersion tin | |
| 7. OSP | |
| PCB Shape | Any |
| Panelized PCB | 1. Tab routed |
| 2. Breakaway tabs | |
| 3. V-Scored | |
| 4. Routed+ V scored | |
| Inspection | 1. X-ray analysis |
| 2. Microscope to 20X | |
| Rework | 1. BGA removal and replacement station |
| 2. SMT IR rework station | |
| 3. Thru-hole rework station | |
| Firmware | Provide programming firmware files,Firmware + software installation instructions |
| Function test | Level of testing required along with test instructions |
| PCB file: | PCB Altium/Gerber/Eagle files (Including specs such as thickness, copper thickness, solder mask colour, finish, etc) |
Lead Time (Peak production time might deffer, please RFQ)
| Category | Q/T Lead time | Standard Lead Time | Mass Production | |||
| 2 Layers | 24hrs | 3-4 working days | 8-15 working days | |||
| 4 Layers | 48hrs | 3-5 working days | 10-15 working days | |||
| 6 Layers | 72hrs | 3-6 working days | 10-15 working days | |||
| 8 Layers | 96hrs | 3-7 working days | 14-18 working days | |||
| 10 Layers | 120hrs | 3-8 working days | 14-18 working days | |||
| 12 Layers | 120hrs | 3-9 working days | 20-26 working days | |||
| 14 Layers | 144hrs | 3-10 working days | 20-26 working days | |||
| 16-20 Layers | Depends on the specific requirements | |||||
| 20+ Layers | Depends on the specific requirements | |||||
| Category | Q/T Lead time | Standard Lead Time | Mass Production | |||
| 2 Layers | 24hrs | 3-4 working days | 8-15 working days | |||
| 4 Layers | 48hrs | 3-5 working days | 10-15 working days | |||
| 6 Layers | 72hrs | 3-6 working days | 10-15 working days | |||
| 8 Layers | 96hrs | 3-7 working days | 14-18 working days | |||
| 10 Layers | 120hrs | 3-8 working days | 14-18 working days | |||
| 12 Layers | 120hrs | 3-9 working days | 20-26 working days | |||
| 14 Layers | 144hrs | 3-10 working days | 20-26 working days | |||
| 16-20 Layers | Depends on the specific requirements | |||||
| 20+ Layers | Depends on the specific requirements | |||||
About us
ABIS Circuits Co., Ltd is a professional PCB manufacturing which is focus on double side, Multilayer and HDI pcb mass production. The company was established on Oct,2006.we have two factories together ,The factory in Shenzhen is specialized in small to middle volume orders and the factory in shaoguan,GuangDong Province is for big volumn and HDI.
PCB/PCBA Quotation of ABIS
To ensure an accurate quote, be sure to include the following information for your project:
Your custom quote will be delivered in just 2-24 hours, depending on the design complexity.
Factory overview
FAQ
Q1: Are you a factory?
A: ABIS is a PCB/FPC/PCBA manufacturer/factory. We involved in
PCB(A) Board more than 10 years.
Q2:Is my PCB file safe if I send it to you for manufacturing?
A: We will never manufacture PCB for someone else without your
permission. NDA is available.
Q3: What is your testing policy and how you control the quality?
A: For sample, usually tested by flying probe; for PCB volume,
usually tested by fixture, this will be more faster. Due to there's
many steps to PCB production, we usually do inspection after every
step.
Q4: What's your shipping way ?
A: 1. We have our own account by DHL, UPS, FEDEX, TNT.
Q5: What is your certificate?
A: ISO9001, ISO14001, UL, SGS,RoHS,TS16949.
Q6: What files should we offer?
A: If only need PCB, please provide Gerber File(DXF,RS274-X,ODB++)
and manufacturing specifications; If need PCBA,Please provide
Gerber File, Manufacturing specification, BOM list.
Q7: What payment do you accept?
A: -Wire Transfer(T/T)
-Western Union
-Letter of Credit(L/C)
-Paypal
-Ali Pay
-Credit Card
ABIS cares every your order even 1 piece
