Active Member
|
[China]
Address: 4113-4116# A Area, HSST PARK, BAO'AN District, Shenzhen, China
Contact name:Wendy
Abis Circuits Co., Ltd. |
|
|
OEM Custom Electronics Flexible PCB Board 94V0 FPC Prototype
flexible double sided pcb
What Is the Difference Between a Flex and a Rigid-Flex Printed Circuit Board?
The rigid-flex printed circuit board gives you the best of both worlds. A rigid-flex PCB combines the flexibility of flex circuits with the durability of a rigid PCB. A flex-printed circuit board has only flexible materials, usually polyimide or polyester-based. They can be single-layer, double-layer or multilayer boards.
A rigid flex PCB has both flexible and rigid materials, with flexible layers sandwiched in between rigid layers with conductors and plated through holes that connect them to the other layers.
Flexible circuit boards by themselves may not stand up to the wear of certain challenging applications, but standard rigid boards tend to be heavy and take up a lot of space.
Combining rigid boards with flexible circuits reduces weight and space, giving you a streamlined product you can use in a wide variety of industrial situations.
Company Profile:
Our Mission:
PCBs for demanding customers, on time with zero defects, produced
sustainably at the lowest total cost. Manufacturing many different
types of PCBs in smaller series (High-mix, Low-volume) involves
constantly adjusting, adapting and problem solving.
Product Details:
| Number of layers | 4-16 layers |
| Technology highlights | Mixed materials including RF and high speed, standard FR-4, polyimide flex. Adhesiveless or adhesive based polyimide flex constructions, with cover coat or flexible solder mask materials. |
| Bending performance | Based on the specific design, the bend performance can range from a basic 90 °bend to fit to a full dynamic flex with 360° range of motion in the flex tail that will withstand continuous cycles throughout the product life. |
| Bend features | Bend radius controls the flexibility of the flex portion of the board. The thinner the material the lower the bend radius and the more flexible the flex section. |
| Materials | RA copper, HTE copper, FR-4, polyimide, adhesive |
| Copper weights (finished) | ½ ounce, 1 ounce, 2 ounce, 3 ounce |
| Minimum track and gap | 0.075mm / 0.075mm |
| PCB thickness | 0.4mm to 3mm |
| PCB thickness in flex section | 0.05mm to 0.8mm |
| Maxmimum dimensions | 457mm to 610mm |
| Surface finishes available | ENIG, OSP Immersion tin, Immersion silver |
| Minimum mechanical drill | 0.20mm |
Rigid PCB Capacity:
| Max. No. of Layers | 20 |
| Max. Board Size | 860*610mm |
| Board Thickness | 0.2-6.0mm |
| Copper Thickness | 0.5OZ-6OZ |
| Material | Various |
| Surface Finish | Various |
| Soldermask | Various |
| Minimum Soldermask Thickness | 0.025mm |
| Minimun Soldermask BridgeDam | 0.15mm |
| Minimum Soldermask Clearance | 0.075mm |
| Peelable Colours | Blue |
| Peelable Minimum Feature | 0.5mm |
| Peelable Maximum Tented Hole | 3.0mm |
| Scoring Angle | 30 Degrees |
| Min. Remaining Thickness | 0.3mm |
| Min. Distance to copper (From center of scoring line) | 0.5mm |
| Min. Track | 0.1mm |
| Min.Gap(TrackTrack,TrackPad,PadPad) | 0.1mm |
| NPTH Min. Drill Size | 0.2mm |
| Plated Drill Size | ± 0.075mm |
| Non-Plated Drill Size | ± 0.05mm |
| Drill Location Tolerance | ± 0.05mm |
| OutlineRouted Slots | ± 0.1mm |
| Line Width/Spacing | ±10% |
| Board Thickness | ±10% |
| Warp and Twist | 0.05% |
| Scoring/V-Cut | ± 5 degrees |
| Scoring Positional Tolerance | ± 0.1mm |
| Aspect Ratio | 10:01 |
Flex PCB Capacity:
| Number of layers | 1 – 6L |
| Technology highlights | Mainly polyimide materials, flex PCB’s are necessary when motion of the PCB is needed, when 3-D interconnections are necessary (i.e. replacing cables and connectors) or when these are both combined due to limited available space. |
| Materials | Polyimide, Polyester |
| Profile method | Laser cutting, punching, rout |
| Copper weights (finished) | 18μm – 70μm |
| Minimum track and gap | 0.075mm / 0.075mm |
| PCB thickness | 0.05mm – 0.80mm |
| Maxmimum dimensions | 450mm x 610mm |
| Surface finishes available | OSP, ENIG, Immersion tin, Electrolytic gold, Gold fingers |
| Minimum mechanical drill | 0.15mm |
Lead Time:
| Category | Quickest Lead Time | Normal Lead Time | |
| Double sideds | 24hrs | 120hrs | |
| 4 Layers | 48hrs | 172hrs | |
| 6 Layers | 72hrs | 192hrs | |
| 8 Layers | 96hrs | 212hrs | |
| 10 Layers | 120hrs | 268hrs | |
| 12 Layers | 120hrs | 280hrs | |
| 14 Layers | 144hrs | 292hrs | |
| 16-20 Layers | Depends on the specific requirements | ||
| Above 20 Layers | Depends on the specific requirements | ||
Factory:
Certifications:
·
FAQ
Q1: How can I get Flex-rigid board quotation?
A: Please send gerber file with format: .PCB / .P-CAD / .DXP / .Gerber
Q2: Can I have Printed Circuits Board sample?
A: Yes, we are pleased to supply module samples to test and check quality, mixed sample order is available. Please note buyer should pay for shipping cost.
Q3: Do you have PCB in stock?
A: Most of our PCB board are customized, which according to Gerber file.
ABIS has samples in stock that could be sent to
you for quality checking always.
Q4: How about the payment terms?
A: By T/T, Paypal, Western Union, etc.
Q5: What board manufacturer do you use for FR4?
A: Main Suppliers(FR4): Kingboard (Hong Kong), NanYa (Taiwan), and
Shengyi (China).
Q6: What do you require in order to produce an assembly quotation?
A: Bill of materials (BOM) detailing:
a) manufacturers parts numbers,
b) components suppliers' parts number (e.g. Digi-key, Mouser,
RS )
c) PCBA sample photos if possible.
d) Quantity
