|
[China]
Trade Verify
Address: TianHe District,GuangZhou,GuangDong
Contact name:Kiara
China World Technology Medical Equipment Service Group |
|
Verified Suppliers
|
|
|
GE Dash3000 Dash4000 Dash5000 patient monitor general electric 801536-002 421263 circuit board assembly Printer writer bracket with flex cable
► Brief Introduction
This bracket is work for printer of GE Dash3000 Dash4000 Dash5000 patient monitor, and It with the flex cable.
► Replacement
1. If your unit has the writer option, remove the writer by unscrewing the two captive screws inside the writer.
Make sure you approach the screw from below the top bar on the
paper roll holder so that you do not damage the unit.
2. Unscrew the thumb screw anchoring the writer cable to the main
assembly and disconnect the flex cable from the processor/power
management PCB.
3. Remove the speaker harness and the optional alarm light cable
harness from the top of the writer board.
4. Remove the handle of the monitor and set aside.
5. Remove the writer bracket from the frame.
Install writer bracket in place. Connect the speaker cable to the writer flex circuit. Connect the writer flex to J7 on the Processor/Power Management PCB and secure it with the thumbscrew.
► Environmental Specifications
| Power consumption: | 75 watts (fully loaded) |
| Cooling: | Convection |
| Heat dissipation: | 240 Btu/hr (max) |
| Operating conditions: | |
| Ambient temperature: | 0 to 40°C (32 to 104°F) |
| While charging batteries: | 0 to 35°C (32 to 95°F) |
| Capnostat III sensor | 10° to 40° C (50° to 104°F) |
| Relative humidity: | 5 to 95% at 40°C |
| Vibration: | MIL-STD 810E, Method 514.4, Category 1 |
| Altitude: | 610 to 4, 570 m (-2,000 to 15,000 ft) |
| Storage conditions: | |
| Maximum: | 70°C (158°F) at 95% relative humidity |
| Minimum: | –40°C (–40°F) at 15% relative humidity |
| CO2 Sensor: | –30 to 65°C (–22 to 149°F) |
| Batteries: | –20 to 60°C (–4 to 140°F) |
► Packing Details
All machines and units are delivered on pallets or carton so as to make sure the safety to the full extent during the transmission. As a international manufacturer, we deliver medical equipment all over the world, insured and tracked as standard using trusted couriers.
In order to ensure that the goods are delivered to customers in good condition, we will carefully and patiently pack the products. Please rest assured that we will use high-quality packaging materials to pack the goods to avoid being scratched or impacted during transportation. Generally speaking, there is no problem with the goods you receive.
But if you find any problems with the goods during transportation, please contact us as soon as possible. But please pay special attention, if the problem is not caused by transportation, it is another matter. In short, after careful inspection by our engineers and our careful packaging, the goods will eventually arrive in your hands intact.
If you want to explore more details about GE Dash3000 Dash4000 Dash5000 patient monitor general electric 801536-002 421263 circuit board assembly Printer writer bracket with flex cable , please let us know. Thank you for your time and interest.
