PS69-DPS Prosoft Communication Module Slave ProfiBus Interface Module

In Stock 100% Brand New and Original PS69-DPS

PS69-DPS is a ProfiBus DP V0 and DP V1 compatible slave interface module from Prosoft Technology. This module is compatible for use with Allen-Bradley’s CompactLogix and MicroLogix 1500 controllers specifically, CompactLogix L20/L30/L31/L32/L35 and L43 (L43 supported with RSLogix 5000 v16) and MicroLogix 1500 LRP. The PS69-DPS occupies a single slot and must be installed not more than Six (6) modules away from the Power Supply as dictated by the Power Supply Distance rating requirement. When connected to the ProfiBus master device, the PS69-DPS is recognized as Input / Output node, allowing inter-controller communication over ProfiBus network. Intercontroller communication permits the transfer of CPU data between Two (2) or more CPUs with the data represented as I/O addresses. With this, the controller with the PS69-DPS functions similarly as distributed I/O component. With the PS69-DPS, data transfer is configured using ladder logic programming language through RSLogix 500 if used with MicroLogix or RSLogix 5000 / Studio 5000 if used with CompactLogix controllers. The PS69-DPS comes with a built-in EC1-160P with an integrated ASPC2 processor, One (1) RS485 port that supports ProfiBus protocol configurable at a maximum transmission speed of 12 MBaud, and One (1) RS232 PS/2 mini-DIN female connector configurable at 9600 Baud as diagnostic interface. The PS69-DPS supports the transfer of up to 244 Bytes of input data; 244 Bytes of output data, read / Write class 1 Alarm service for DPV1. Up to 32 Profibus devices can be connected in a single segment therefore, up to 31 PS69-DPS can be used in a segment excluding the Master device.

The Prosoft PS69-DPS CompactLogix inRAx PROFIBUS DP V0/V1 slave communication module is a PROFIBUS communication interface module that allows the allows the Allen-Bradley CompactLogix or MicroLogix control modules to accommodate the PROFIBUS DP V0/V1 networking protocol in a wide range of industrial automation systems. The PS69-DPS module offers enhanced features that allow it to be used as a standard I/O module on the CompactLogix or MicroLogix controller, and it supports both I/O control and messaging capabilities. The PS69-DPS module is a slot-based interface module that can be installed on the Allen-Bradley 1796 backplane, and it draws a maximum backplane current of 260 mA at 5 Volts DC. It is compatible with the CompactLogix L20, L30, L31, L32, L35, and L43 processor, and it also supports the MicroLogix 1500 LRP. On the MicroLogix and CompactLogix control systems, the PS69-DPS module is recognized as an input/output module that has access to system memory for data transmission on the RS-485 link. Process data is transmitted at a selectable baud rate between 9.6 kBaud and 12 kBaud over a maximum length of 100 meters (325 feet).

The Prosoft PS69-DPS module comes with an onboard 9-pin, D-Shell Socket RS-232 communication port that serves as a diagnostic interface. It uses the Ladder Logic PLC programming language for data transfer between the processor and the module, and it is configured by using the RSLogix5000/500 Windows-based programming software. The PS69-DPS module comes with an LED status indicator that displays the communication and module status. The PS69-DPS module has an operating temperature range of 0 to 60 degrees Celsius and it can be used within a 5 to 95% non-condensing relative humidity range. It is CE, UL, and C-UL certified.

About Our Team

Our company is headquartered in Xiamen, Fujian, China, and directly cooperates with the original factory; has a professional sales team, its own engineer technical support, and good after-sales service; large inventory, original product quality, and fast delivery. These help us become a strong supporter of our customers, provide solutions for end-users, and ensure profits for resellers.

Best Quality Assurance

1. High quality

2. Prompt Delivery

3. We provide a large number of brand-name parts.

4. We have experienced staff and extensive test facilities.

5. There are many goods in stock.

6. We only provide the original new items, 100% make sure the best quality!

You may have any questions

Q: What are your packaging conditions?

A: Generally speaking, we pack the goods in cartons with foam padding to prevent damage to the goods.

Q: What are your payment terms?

A: 100% T/T before shipment. Western Union, credit cards are also acceptable

Q: What about your delivery time?

A: Generally 1-3 days after receiving your payment. The specific delivery time depends on the type and quantity of the order.

HOT PRODUCTS