|
[China]
Trade Verify
Address: No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Contact name:Buffy
Guangdong Bunge Building Material Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Sliding partition walls frameless folding glass doors movable frameless folding glass doors partition wall
Description:
An Operable Wall is a very versatile product designed to make the most of your limited office space. The acoustic panels will move with ease within the top track and have no unsightly floor tracks or guides etc.
Neat and clean, operable walls should complement the room. They should provide the acoustic qualities of a fixed wall and be fitted with quality seals and closures.
Our operable walls use proven tracking and trolley systems to ensure that they stack correctly and close smoothly.
It is impractical to cut out all sound transmission so a good criterion is “To limit transmission to a level that is no longer distracting”.
Aim for a sound rating in balance with the acoustics of the
surrounding structure. Even with a perfect operable wall, the sound
will still seep through ceilings, carpets, aircon, ducts, etc.
Controlling this peripheral leakage around the operable wall (for
example with baffling above the ceiling) will do a lot to improve
the overall performance of the installation.
Similar activities require less sound isolation than a quiet
activity next to a noisy one. Amplified sound is more difficult to
suppress. General background noise helps reduce distraction.
Avoid specifying far high ratings than needed. High STC operable
walls are costly.
All tests have used sweep seals alone at the top and bottom panels,
even for the highest STC test (demonstrating it is not necessary to
adopt retractable seals to achieve the sound rating required.
Technical parameters:
| Series | BG65 Glazing Glass Partition | BG85 Aluminum Frame Glass Partition | BG85 Sound proof Glass Partition |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Track system | Single or twin point | Single or twin point | Single or twin point |
| Panel thickness | 36mm | 85mm | 85mm |
| Panel height | Up to 3000mm | Up to 6000mm | Up to 6000mm |
| Max height | 3000mm | 6000mm | 6000mm |
| Panel width | 800-1100mm | 800-1100mm | 800-1100mm |
| Frame construction | Top and bottom aluminum | Aluminum frame | Aluminum frame |
| Glass thickness | 10mm or 12mm single glass | 10mm or 12mm single glass | double 10mm glass |
| Fire safety | Optional Class O | Optional Class O | Optional Class O |
| Vertical profiles | n/a | n/a | Aluminum anodised with sealing profiles |
| Retractable seals | n/a | n/a | Aluminum black with double rubber seals |
| Operation of seals | n/a | n/a | n/a |
| Pass doors | Fixed full height door | Fixed full height door | Fixed full height door |
| Locking | Optional lock to panel | Optional lock to panel | Optional lock to panel |
| Sound insulation | n/a | n/a | n/a |
| Weight | Approx 30 kg/sq M | Approx 32 kg/sq M | Approx 50 kg/sq M |
Installation details:
1. Before the renovation, the on-site measurement must be performed. According to the measurement data and the construction structure of the site, the design drawings shall be issued by the construction party, and the two parties shall confirm to enter the next step without any doubt.
2. Partition production is usually completed by a design company in its own factory. The installation engineering part is produced on site. Therefore, after confirming the design drawings, the requirements for glass thickness, materials, hardware accessories, and borders shall be analyzed and explained.
3. Pay attention to the strong and weak power engineering during construction, because he not only concerns the installation and wiring of the company's supporting facilities in the future, so he must find a professional qualified cabling company, and have professional and technical personnel to carefully measure the construction site, and then All the drawings on the drawings show the status of reserved switches, sockets, and the direction of various lines.
4. When installing the active partition, be sure to pay attention to the configuration of the air conditioner's reasonable position, especially the central air conditioner. Special attention must be paid to keeping the air outlet and return air outlet in each functional area.
