India Folding High Partition Banquet Hall Wooden Acoustic Room Divider For Studio

India Folding High Partition Banquet Hall Wooden Acoustic Room Divider for Studio

Acoustic room dividers details

Whether you are looking for a space-division solution for your residential, small commercial or large commercial application, acoustic room dividers are trouble free. Each divider is custom made to fit your opening, so that you don't have to make your opening fit the partition.

Acoustic room dividers have been the perfect solution for millions of customers worldwide. From the handsome, rigid folds of our single-panel and twin-panel models to the soft folds of our model, it provides a solution for almost every conceivable sound and sight division requirement.

Acoustic room dividers are installed throughout all types of educational institutions, convention centers, hotel conference rooms and meeting rooms, medical and religious facilities, corporate offices, training facilities, restaurants and lounges, apartment complexes and homes worldwide. This is just to name a few.

Because of their design statement and performance, acoustic room dividers have become the product of choice, preferred over other comparably priced accordion partitions that offer so much less.

Technical information

Do you know how to use this acoustic room dividers exactly?

Firstly, how to move the acoustic room dividers panels?

All of the operation should be gentle and safe. Use both hands to grasp the PANEL on both sides of the screen in the direction of the rail lightly pull the screen, then turn the movable partition wall panel in the direction of the rail.

After pushing the acoustic room dividers panel to the position where it should be placed, fix them.

Tip: When pushing the acoustic room dividers panels to the intersection, pay attention to the direction of the rail, and then push the panel along the rail to the position where it should be placed.

Secondly, how to fix the panels?

Hold the acoustic room dividers panel with one hand and put the handle into the hexagonal steel at 1100 MM on the side of the panel, and grasp the handle to turn 180 degrees clockwise (or continuously), the telescopic seal inside the panel will pop up to fix the screen.

Insert the handle into the groove on the side of the panel, and pull the handle up to open the telescopic seal inside the panel to fix it. After putting the whole set of panels, please check if the panels are straight? And whether it is on the same plane as the rail, if it is not straight, then retract the upper and lower telescopic seals to adjust until the panel is straight.

Thirdly, how to operate telescopic panels?

Usually, the last panel of the partitions is a retractable panel, we need to push it to the position where it should be placed, and then the upper and lower movable seals are pulled up in the side vertical groove, then place the handle in the operating hole of the retractable panel surface and turn it counterclockwise until the side of the telescopic aluminum plate is pressed against the wall.

Fourth, how to operate the pass door?

Push the pass door to the position where it should be placed and touch the screen in front. Insert the handle into the groove on the side of the panel, and pull the handle up to open the telescopic seal on the inside of the screen to fix the panel. Open the small door, insert the handle into the operation hole of the other side of the panel, and move the handle upward to open the flexible seal on the other side of the screen to fix it.

Fifth. How to collect panels?

1. If there is a pass door, firstly rotate 180 degrees through the square hole on both sides of the door in the middle of the door, loosen the upper and lower seals through the transmission wheel, and then close the pass door;

2. Open the telescopic aluminum plate and the upper and lower seals of the last panel;

3. Retract the telescopic aluminum plate of the last panel, so that the distance generated by it can at least rotate the distance of the panels;

4. Push the panels along the direction of the rail to the position of the screen;

5. After each set of panel is collected in the same way, press each of the two panels to minimize the distance between the panel and panel. If necessary, the upper and lower movable seals of the last panel placed at the storage can be opened to make it press the rails and the ground, so as to prevent others from pulling the panels out.