|
[China]
Trade Verify
Address: No. 5-37, Fengxi 2nd Road, Hailong Street, Liwan District, Guangzhou, China
Contact name:Buffy
Guangdong Bunge Building Material Industrial Co., Ltd |
|
Verified Suppliers
|
|
|
Soundproof Decorative Material Folding Movable Partition Walls with Installation
BUNGE movable wall description
Movable Partition Wall’ solution is to keep efficient open spaces by the use of movable walls. Let us help you find the best flexible solution for your environment and turn the room you have into the space you need.
This division receives the foreign production technology, has the sound insulation and the flame retardant function, may divide nimbly and make full use of the space, deduces the spatial nimbleness and the integrity.According to the different needs of customers, the current market products are: 65mm series, 85mm series, 100mm series and other products (special products), the general value of sound insulation effect is: 42db-56db.
| Series | BG 65 | BG 85 | BG100 |
| Panel supension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 8000 mm |
| Panel width | 600-1230 mm | 600-1230 mm | 600-1230 mm |
| Face material | 9 mm | 9 mm | 9 mm |
| Pass doors | Single Door or Double Door | ||
| Sound insulation | 20 – 32 db | 28 – 36 db | 32 – 50 db |
| Finish Material | Plywood / MDF /Laminate / Melamine / Gypsum | ||
| Board / Fabric / Insulation / Fireproof /Wall Paper /Vinyl /Painting /etc,(Customized) | |||
Suitable Used In:
1. Studios, recording rooms, listening rooms, rehearsal rooms and more professionally interspace timbre projects.
2. Theaters, indoor gymnasiums, discos, KTV rooms and more performance and entertainment location.
3. Meeting rooms, offices, halls, hotels and more sound absorption and secrecy projects
4. Air-port, railways, bus-stops, manufactories, workshops and more noise reduction projects.
Installation:
1. Preparing
1) constructing location: Keep dry, the temperature should be higher than 10º C, the widest humidity range should confined to 40%-60% after construction 24 hours before construction, the location should reach the standards as above.
2) Acoustic panels: For the acoustic panels accommodated to the circumstance of construcing, please place the panels in the constructing location for 48 hours, check up the type, specification and amount of the panels before construction.
3) Keels: Fix the keels on the wall flatly according to the plan, the keels should be flat, slick, no rust, no metamorphosis, the wall must be contruct according to the standards, the keels suitable install with acoustic panels, leave smaller than 500mm space between each wooden keel, install the keels vertically with acoustic panels.
2. Fixing
1) size of wall: All panels should be installed in accordance with the manufacturers recommendations.
2) Cutting: All necessary hardware and accessories for a complete job installation are to be finished by the contractor.
3) Install the acoustic panels: The installation of acoustic panels should be carried out in a sequence from the left to the right, from upside to downside, the panels are cut to fit on site, traditional woodworking tools are suitable for cutting the panels, if panels are cut using a fine tooth table saw the panels should be cut face up to avoid scratching and at a much slower speed to avoid any tearout or chipping.
