Guangdong Bunge Building Material Industrial Co., Ltd |
Verified Suppliers
|
|
Operable Wall Partitions Sliding Sound Proofing Movable Acoustic Room Dividers
Acoustic Room Dividers Specification:
The acoustic room dividers can create multipurpose areas, with fast conversion of large spaces into lots of small ones and vice versa.
These acoustic room dividers are made from independent elements that can be easily moved and which slide on tracks fixed just to the ceiling so that when they are “put away”, there are no unsightly and hazardous tracks on the floor.
Each module sits perfectly flush against the ceiling and floor, thanks to a telescopic system that guarantees sound insulation and stability.
SURFACE TREATMENT
The standard colour for the track profile of the folding wall and
the jamb profiles is white (RAL 9010) and the panels edge profiles
are natural anodized.
There is a wide variety of panel surface treatments, from which a suitable one can be chosen:
· White melamine (standard);
· Coloured melamine (RAL and NCS catalogues);
· Decorative melamine
· Natural veneer
· Special solutions (laminate, magnet board, school blackboard,
etc.).
As a special solution it is possible to install a glass opening in
the center of the panel. The opening can cover the whole panel, the
bottom or the top.
The maximum measurement of the glass is 150 mm in from the sides of
the panel and 300 mm in from the top and bottom of the panel.
Acoustic Room Dividers --- 65,85,100,125 mm
BUNGE Acoustic Room Dividers provide a wide range of aesthetic, operational, and performance options and are the perfect solution to meet demanding space flexibility requirements. With over 10 years of acoyustic room dividers expertise, LPA has been the exclusive installing distributor of BUNGE acoustic room dividers. Our designers can assist you early in your design with layout, structural support and storage pocket requirements, finish options, reliable budgets, and the myriad of other details required to make each application a success. Highlights include:
STRUCTURE
The BUNGE Acoustic room dividers structure is composed of aluminum
profiles, sheets of treated particleboard or MDF and insulation.
The combined structure forms a panel that has a total thickness of
82 mm and depending on the insulation material ensures a soundproof
resistance of 32-53dB (decibels).
When the acoustic room divider is supported at the ceiling it
runs along an adjustable aluminum upper track that is equipped with
bearings inside of carriages. This enables the walls height to be
adjusted by ±18 mm. The carriages are installed on every
second wall panel and are located at the center of the panel.
Because the acoustic room dividers wall hangs from the ceiling, it
is important for the installation of the wall that the wall is
attached to something solid (i.e. concrete ceiling, steel
structure, wood beam etc.).
In the case that the folding wall is supported by the ground, an
aluminum track is installed on the floor where the carriages move
the wall and at the top there is a guiding track. The height is
also adjustable by ±18 mm.