Folding Partition Wall Acoustic Room Dividers Movable Partition Wall With Door

Folding partition wall acoustic room dividers movable partition wall with door

Description:

High-activity partitions can be divided into five categories according to the opening and closing modes: assembled, straight-sliding, folding, roll-up, and landing.
Assembled partitions are assembled from a number of independent partitions and, in principle, cannot be moved to the left or right. Therefore, there are no rails and pulleys for the active high partitions, and the partitions should be installed one by one or removed one by one.

The folding event screen can be unfolded and folded like an accordion bellows. According to the different materials used, it is divided into two categories: hard and soft. The former is made up of wooden partitions or metal partitions. The latter is made of cotton, hemp fabrics or vinyl plastic products. The partitions of rigid partitions are connected by hinges, and the angles of the partitions themselves are also changed when the partition is opened and closed. The fan in the closed state is approximately vertical or perpendicular to the track.

Technical parameters:

The straight-sliding partition is composed of a number of partitions. The active-high partitions can be independent or connected by hinges. The individual partitions can slide along a common track or slide along their own track, but they do not change their angle during the slide and open or close along a straight line.

When the straight sliding partition is fully opened, the partitioning fan can be concealed on one side or both sides of the opening. When the opening is large and the partitioning fan is large, a curved track or a track between the other is often overlapped.

The roller shutter partition consists of a large number of vertical strips. The slats are made of wood or metal, and the slats and slats are connected together with a metal ribbon. The opening and closing of the roller shutter partitions can be manually or by means of specialized machinery. When the sashes are closed, the high partitions are rolled up in a square tube or a circle. Inside the barrel. Some rolling curtain partitions can also be rolled, that is, the direction of the slats is horizontal.

Pass door operation:

Active screen partition If there is a door in the middle of the door, first turn the square hole on both sides of the door to rotate 180 degrees, loosen the upper and lower seals through the drive wheel, and then close the door in the door; open the last stretch of the movable screen partition of the aluminum plate and Upper and lower seals; retract the last screen of the retractable aluminum plate, so that the distance generated by the screen can at least turn the distance of the screen; the active screen partition cut along the direction of the rails to the position of the closing screen; after each group of screens are collected in the same way Press each two screens tightly to minimize the distance between the screen and the screen. If necessary, you can open the up and down motion seals that are separated by the last active screen that is housed in the Tibetan plate so that it presses against the rails and the ground. This will prevent other people from simply pulling the screen out.

Feature:

1. No need floor suspension: There is no track on the floor, just install the track on the ceiling;
2. Stable and safe: It is stable and reliable after being cut off, and it is not easy to swing;
3. Soundproof and environmental protection: sound insulation effect is good, the maximum sound insulation coefficient can reach 53dB;
4. Insulation and energy conservation: excellent insulation performance, according to different seating rates, the large space is divided into small spaces to reduce the air conditioning power consumption;
5.High-efficiency fire prevention: The use of high-efficiency fireproof materials, good fireproof performance;
6. Beautiful and generous: any surface decoration, can be combined with the indoor decoration effect;