Movable Partition Walls, Operable Partition Panels, Banquet Hall
Folding Partition Walls
Finishing & Stacking
BUNGE folding partition walls are available in various
decorative finishes. The panel surface will be as per the client’s
requirement finished that is MDF, MICA Laminate and FABRIC, either
in factory or by others at site.
Panels can be stacked in a variety of positions. Centre stacking
and side stacking can be choose as per space available at site
Suspension System
The partition wall has 2 suspension modes including the single
roller suspension and double roller suspension. Each suspension is
different in stacking.
Technical dedetails
TRACK & TROLLEY
Each Panel shall be suspended on Extruded 6063 – T5 Anodized
Aluminum Track, Steel Cold Ball Bearing Rollers / Trolley of
material nylon wheel made with the base Material of POM 45 tempered
steel , maintance free with multiple Balbearing. The individual
element is adjustable in height without opening of the ceiling.
Retractable Pressure SealsThe panel once positioned will realize a sealed effect via
retractable pressure seals. The seals can be easily controlled or
locked by means of simple on-site operation, which means users can
turn the waist-high operating handle to extract the pressure seals.
The handle of partition wall rotate a locking bar inserted from the
panel edge and the top and bottom seals can be simultaneously
controlled. It is important that the soundproof pressure seals can
be properly extended to achieve excellent sound insulation effect.
Vinyl Seal of Butane Rubber will be used at top and bottom and as
well as Closure Seals for the Operable wall system. Retractable
seal drop will be 20 mm.
Rubber Sealing Strip
The rubber sealing strip is used to seal the gap between the
sliding panel top and the track as well as the gap between the
sliding panel bottom and the floor. It is a widespread and
effective acoustic barrier and control noise propagation from one
side to other side of movable wall which will give silence
ambiance.
Operation
There will be a 20-25mm gap between the top of panels and the
bottom of the head track when the wall panels are moved. Similarly,
the gap also exists between the bottom of panels and the floor.
Means Retractable seal drop will be 20 mm – 25 mm .
The pressure seals are operated by Retractable Mechanism to move
Top and Bottom Seal Manually Operated by a Handle inserted in the
Panel Stile, Turning the Handle through 45 degrees shall
simultaneously Extend or Retract the Top and Bottom Seals through
steel and Spring Mechanism which shall firmly hold the Seals in the
Retracted or Extended mode By installing the retractable pressure
seals on the top and bottom of panels, excellent sound insulation
effect is achieved when the panels are positioned. The overall
sound insulation effect can be achieved via the extension sleeve on
the last panel and the tight sealing of the top and bottom seals.