Active Member
|
[China]
Address: Longgang Shenzhen City, China
Contact name:Sherry
Shenzhen Maixiang Technology Co.,Ltd |
|
|
Electronic Sliding Gate Motor Automated Remote Door Opener
specifications:
| Power supply range | AC220V/110V±10% 50/60Hz
|
| Net weight | 8.5kg
|
| Max loading weight | 1800kg
|
| Working humidity | ≤85%
|
| Rated power | 200w
|
| Output gear module | M=4
|
| Output gear number | Z=16
|
| Open(close) speed | v=12m/min
|
| Maximum pull | 1100N
|
| Package | one set in one carton |
| Working temperature of motor | -25 to +55 Celsius degree
|
Functions of sliding gate operators:
| Packing list | |||
| Name | Quantity | Unit | Remark |
| Sliding gate operator | 1 | set | Necessary |
| Remote control | 2 | pcs | Necessary |
| Internal hexangular bolt | 4 | pcs | M8*40 |
| Internal hexangular bolt | 4 | pcs | M6*16 |
| Left limit iron | 1 | pcs | Necessary |
| Right limit iron | 1 | pcs | Necessary |
| Base board | 1 | pcs | Necessary |
| Release key | 2 | pcs | Necessary |
| Manual | 1 | pcs | Necessary |
| Infrared photocell | 1 | set | Optional |
| Radio emitter | 1 | set | Optional |
Communication with customers:
1 The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.
2 The power indicator light doesn't flash and the key doesn't react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.
3 The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the
position of the limit iron.
4 Crash proof is not effective.
A: Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop detector is
right .
5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check whether
it works well.
6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B: Check whether the code of the remote control is the same with
the code of the control panel.
