China plastic PS foam clamshell take-out food containers machinery

China plastic PS foam clamshell take-out food containers machinery

The PS food container machine mainly including three main parts:

1. PS foam sheet extruder: make PS foam sheet from raw material

2. Fully auto forming and cutting machine: make PS sheet to finished products, such as PS foam tray, PS foam box etc (we can design mould according to customer requirements)

3. Plastic recycle machine: recycle waste products to granules, the can mix with new material and put into PS foam sheet extruder again

A. PS Foam Sheet Extruder

Model: LGPSP—100/120 type

Detail parameters:(extruding output : 5 Ton/day):

1. Extruder (screwΦ100mmx32:1)

Screw material: 38CrmoAi steel after quenching and tempering, polishing the surface

Automatic temperature control:zone 6

Butane pump: 1 set

Digital Pressure Gauge:1 set

Automatic Hydraulic Screen Changer: 1 set

Electrical control cabinet:1 set

Motor 3 sets: 4 pole 55kw (Frequency Control), 4 pole 2.2KW (Frequency Control), 4 pole 5.5kw

The 2nd extruder

Screw diameter: ø120mm

Aspect Ratio: 32:1

Automatic temperature control:zone 6

Head Pressure Gauge:1 piece

Automatic water circulation cooling system: 5 sets

Motor: 4 pole 55kw (Frequency Control)

Electrical control cabinet:1 aet

Extruder installation dimensions: 30m * 4.5m * 3m

2, Cooling and shaping system

Hollow circulating water cooling and shaping drum a set of

3, Traction system

Rubber roll 3 (installed according to customer's needs)

Traction speed :3-31m / min

Motor 1 set: 4 pole 3kw (Frequency Control)

Counter: 1 set

Alarm System 1 set

Traction: the friction between its own masterpiece S-way movement

4, Winding device

Winding pneumatic shaft: 2 pieces(installed according to customer demand)

YLJ112-6/10 torque motor: 2 sets

Worm Reducer: 2 sets

Static eliminator:1 set

Gas Alarm: 1 set

5, The mixing system

Hopper capacity: 50kg / time (time relay control)

1 set: 4 pole motor 3kw

6, Automatic feeding system

Automatic Control System

Motor: 1 set, 6 pole 1.1kw

7, Die head material: Die Steel

Sheet thickness: 1.5-3mm

All of the above equipments for a complete set of Okada-type two-stage series foam PS sheet production line

Total installed power: 255kw

Center Height: 1000mm

B. Fully auto forming and cutting machine

Fully automatic forming and cutting machine integrates forming, cutting and stacking (trimming) at the same time. It has the features of saving labor, improving efficient, lowing labor intensity and reducing production cost. It adopts PLC controller and touch screen to control the working program. Two workers are enough for whole production line.

The machine is plastic sheet forming equipment in one step with following process: transporting sheet, heating, forming, cutting, stacking and winding waste edge.

C.Plastic recycle machine

Plastic recycle and pelletizing machine is designed to reclaim the foamed polystyrene materials almost identically to new ones with its own superior filtering performance.

Structure

-- Extrusion unit

-- T-die with screen changer

-- Cooling water bath unit

-- Pelletizing unit

-- Control panel unit

Main technical parameters