Jumbo Paper Roll Slitter Rewinder Machine Pipe Tube Core Making
Technical parameter
Slitting width | >30(mm) |
Basis weight | 80-600g |
Motor power | 5.5kw |
Slitting knife | 18sets |
Rewinding way | Gas up outside the closed |
Speed of adjust and control | Magnetic force |
Speed of Slitting | 1-150(m/min) |
Power input | 380V three-phase four-wire |
Operator | 1 |
Machine introduction
- This type is suitable for 1200mm in diameter and width of 1600mm,
weight 80-600g paper slitting and rewinding.
- The paper base paper for pneumatic lift on paper. This paper on the
way to save labor, but also easy to operate.
- Brake mode for pneumatic brake. According to the size of the paper
to quickly adjust the brake pressure, the winding to firmness.
- The paper adopts the method of electric lifting after the
completion of the discharge. The whole paper cuts a good hanging
down, completely free of artificial lift, move the mode of
operation, has the advantages of convenient operation and saves
labor and time.
- The main implementation of the host device for CHINT products;
cylinder components for the Austrian products, these are our old
products, with durable, high practical value.
Machine delivery
our factory