Active Member
|
[China]
Address: HeBei，China
Contact name:Sophie Zhang
Langfang Pangolin Drilling Tools Co., Ltd. |
|
|
Polyurethane Screen 300GPM Drilling Mud Recycling System
Easy To Disassemble, Saving Time HDD Mud Recycling System
Introduction
1. Horizontal, three-cylinder, single-acting reciprocating piston
pump. The pump can be powered by a diesel engine, which is simple
and convenient to operate, and can be controlled in a short
distance or remotely.
2. This pump has the characteristics of compact structure, stable
operation, high output pressure, long life, stable performance and
good versatility.
3. This pump adopts automobile transmission, can obtain six
different displacements and pressures, the configuration parameters
are selected reasonably, and the construction technology can meet
different requirements.
4. Drilling fluid is mainly used for core drilling of coal geology,
metallurgical geology, and hydrogeology of about 2000m. The
drilling fluid can use muddy water, coal water, etc.
Main structural features
1. Good capacity and performance: The system capacity can reach
240m3/h (1000GPM), which can meet the slurry treatment of
large-scale trenchless projects.
2. The high wear-resistant polyurethane cyclone separator is the
same as the international brand, can be used for more than 3800
hours, has a long service life and good interchangeability.
3. All parts of the equipment are connected quickly and
disassembled conveniently, saving time.
4. Explosion-proof lamps meet the requirements of night
construction, easy to operate, safe and reliable.
Product parameters
| Customized | YES |
| Capacity | 50-240 ㎥/h (200-1000 GPM) |
| Screen Area | 2.2-8.4 ㎡ |
| Separation Stage | 2stage / 3stage |
| Tank Volume | 5-30 ㎥ |
| Total Power | 25-184 Kw |
| Total Weight | 5.5-20 t |
| Land Transport Dimension (mm) | customized |
| Screen material | Polyurethane |
| Cyclone (mm) | 250 -900 |
| Impeller material | Cr26 |
| Application | Drilling |
| Specification | Can be customized according to requirements |
| Model | CSJ-FN-30C | CSJ-FN-60C | CSJ-FN-120C | CSJ-FN-200C | |
| Capacity (m3/h) | 30 | 60 | 120 | 200 | |
| Slurry pump | Model | DC-EHM-1.5C | DC-EHM-3C | DC-EHM-3C | DC-EHM-4C |
| Power (Kw) | 7.5 | 11 | 22 | 37 | |
| Pressure (MPa) | 1.0~2.0 | ||||
| Shale shaker | Power(Kw) | 1.5 | 2 | 3 | 3 |
| Vibration force(KN) | 30 | 40 | 60 | 60 | |
Screen size (mm) | UP | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 |
| Down | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 | |
| Cone Model | FN-100 | FN-150 | |||
| Cone Number | 3 | 6 | 12 | 8 | |
| Separation size (μm) | 10-30 | ||||
| Total Power (KW) | 9 | 13 | 25 | 40 | |
| System Max.Size(mm) | 1650X1450X2150 | 2000X1600X2250 | 2170X2000X2400 | 2400*2300*2400 | |
| System weight (Kg) | 1200 | 1900 | 2500 | 3500 | |
HDD mud recovery system working procedures
1. After 1 or 2 or 3 sets of desander cyclones sit on the vibrating
screen, a set of centrifugal pumps will separate the desander
cyclong in the second stage, and the solid desander will discharge
the vibrating screen or directly cut the box and the liquid flow
desander Will flow into the desander chamber.
2. After the de-sander, a certain number of de-sand cyclones will
be placed to separate fine particles. The solids except the de-sand
will be discharged into the vibrating screen or cuttings box, and
the fluid in the de-sand will enter the de-sand chamber .
3. There is a drilling machine on each side of the drilling machine
and a set of vertical mud pumps are installed on the top of the
drilling machine to feed the vibrating screen. The shale shaker
separates the drill cuttings and the fluid portion falls into the
sand pool through the sieve hole.
4. The mixing pump is installed on the anti-skid trough to
transport the drilling mud and inject the mud into the mud hopper
to remix the new mud with new chemicals. The mixing hopper can be
installed on the top of the tank or on the slider according to
customer requirements.
Pic Show
Pangolin (China) Construction Machinery Co., Ltd. is a drill
manufacturer with complete testing equipment and strong technical
force. Our products have a wide range, high quality, reasonable
price, and timely delivery, which are widely used in oilfields,
drilling, non-excavation fields and other industries. Our products
are widely recognized and trusted by users, and can meet the
ever-changing economic and social needs. To
We welcome new and old customers from all walks of life to contact
us for future business relations and mutual success!
FAQ:
1. How to order the products?
A: Please send the inquiry with detail item description or with
Model number.
2. How about the common packing?
A: If there is no special packing demand, we will take it as our
normal packing. First in small carton, and then put in the bigger
carton together to make sure goods completed.
3. Can I expect a quality products?
A: Yes. mature production technology ensuring the quality satisfy
international request.
4. How to check the product are the exact one you want?
A: If possible, please attach one reference picture to avoid any
misunderstanding or any links from our website for a better
understanding.
5. How to control quality?
A: We have our own experienced QC team,there will be strict
inspection and testing for each order before shipping out.
6. Fast delivery time:
A: Usually it takes 25 days for production.only 3 or 5 days if we
have stock of your request size.
7. Competitive price:
A: Our factory can supply you the lowest price due to direct sale
to customers without distributor!
