|
[China]
Trade Verify
Address: The Sixth Industrial Zone of Nanlang Street, Zhongshan City, Guangdong Province
Contact name:jiang
Packmate (Guangdong) Co., Ltd. |
|
Verified Suppliers
|
|
|
Fully automatic liquid, particle, and powder packaging machine,
shared among three products, 30-50 bags/minute
DS180A-P-G-L Stripe Powder Granular Liquid Triple Use Stripe Back Sealing Packaging Machine
1.1 DS180A strip back sealing packaging machine (servo motor heat sealing and bag pulling, 304 host)
Technical parameters:
Packaging materials: powder, particles, liquids
Packaging capacity: 0.2-30g/bag (changing specifications may require replacement of accessories)
Measurement accuracy: ± 1% -5% (according to standard)
Packaging speed: 30-50 bags/min * (depending on bag length and material condition)
Bag making capacity: W ≤ 80mm × L ≤ 150mm
Packaging film: ≤ 180mm
Bag size: W: 25mm × L: 122mm (to confirm the schematic diagram of the sample bag)
Packaging film width: 60mm
Vertical sealing form: twisted edge sealing
Horizontal sealing form: diagonal straight seal
Back sealing width: 5mm (according to the confirmation diagram of the sample bag)
Horizontal sealing width: 9mm (according to the confirmation diagram of the sample bag)
Cutting method: Round corner cutting
Easy to tear incision: (confirm according to the sample bag diagram)
Optoelectronic control: SUNX101
Bag pulling method: Servo motor heat sealing bag pulling (Siemens)
Packaging material: Composite packaging material
Power supply voltage: AC 220V/50HZ, 2KW
Gas consumption of gas source: 6Kg, 0.4 m3/min
Basic configuration:
Siemens 7 'color touch screen+Siemens PLC (Chinese and English operating languages), error prompt, self diagnostic function
Taiwan AIRTAC pneumatic components
Yudian PID temperature control (2-way vertical sealing and 2-way horizontal sealing)
Siemens servo motor bag pulling
Schneider or Omron electrical components
Å Panasonic safety door switch
Integrated manual correction function
Manual expansion shaft film installation device
The exposed parts of the entire machine are made of 304 stainless steel or aluminum alloy (excluding those that cannot be used for moving parts)
CCL1-N powder metering device (servo motor driven screw, hollow screw, semi open hopper)
Technical parameters:
◇ Measurement range: 0.2-30g (no need to change screw attachments)
◇ Filling accuracy: ≤ national standard (depending on the packaging material situation)
◇ Filling speed: ≤ 60kg/min
◇ Filling motor: Siemens 750W
◇ Power supply: AC 220V/50HZ 900W
◇ Hopper capacity: 12L (semi open)
◇ Lifting method: Hand cranked screw
◇ Hollow screw technology allows for arbitrary control of the air content inside the bag. By selecting nitrogen filling function accessories, nitrogen filling function can be achieved (nitrogen filling function accessories are not included in this quotation)
◇ All 304 stainless steel appearance parts
◇ Randomly matched with 1 set of measuring screws
TB-30 push cup measuring device
Technical parameters:
◇ Measurement range: 0.2-30g (changing the weight may require changing the measuring cup attachment)
◇ Filling accuracy: ≤ ± 1-5% (depending on the packaging material situation)
◇ Filling speed: ≤ 60kg/min
◇ Gas source consumption: 6Kg, 0.3 m3/min
◇ Hopper capacity: 8L (integral)
◇ All 304 stainless steel appearance parts
◇ Randomly matched with 1 set of measuring cups
| 型号 | 类型 | 填充物 | 填充范围 | 填充精度 | 填充速度 | 驱动装置 | 机身材质 |
|---|---|---|---|---|---|---|---|
| LF100A | 单头液体磁力泵计量装置(不带料斗,独立控制) | 纯稀溶液(无颗粒) | 0-100ml(标准配1个进料管) | +1-3% | 最大:4.2L/min(单头) | DC调速马达驱动 | 不锈钢 |
| LF100B | 单头液体齿轮泵计量装置(25L桶) | 低粘度液体(无颗粒) | 0-100ml(标准配1个进料管) | +1% | 最大:4.2L/min(单头) | 伺服马达驱动 | 不锈钢 |
| P3-R26 | 气动精密陶瓷活塞旋转阀泵 | 中高粘度液体 | 0-30ml | ±1% | ≤50次/分钟 | 气动驱动 | - |
Liquid optional measuring device: (depending on material characteristics)
LF100A single head liquid magnetic pump metering device (without hopper and independent control)
Filling material: pure dilute liquid (without particles)
Filling range: 0-100ml (standard with 1 feeding tube)
Filling accuracy:+1-3% (depending on the filling volume)
Filling speed: Max: 4.2L/min (single head)
Drive device: DC speed regulation motor drive
Rack: stainless steel
The speed and filling amount are set on the main panel.
LF100B single head liquid gear pump metering device (25L bucket)
Filling material: Low viscosity liquid (no particles)
Filling range: 0-100ml (standard with 1 feeding tube)
Filling accuracy:+1% (depending on the filling volume)
Filling speed: Max: 4.2L/min (single head)
Drive device: driven by servo motor
Rack: stainless steel
The speed and filling amount are set on the main panel.
P3-R26 pneumatic precision ceramic piston rotary valve pump
Technical parameters:
◇ Applicable materials: medium to high viscosity liquids
◇ Measurement range: 0-30ml
◇ Measurement accuracy: ± 1%
◇ Filling speed: ≤ 50 times/minute
◇ Driving method: pneumatic
◇ 25L constant temperature material bucket (electric hot water interlayer constant temperature)
Standard pneumatic valve discharge pipe device (effectively preventing wire drawing and dripping)
