Active Member
|
[China]
Address: Room 529, B-building, Jianye Park, No. 389, Rd Danfeng, Mudu, Suzhou City, China
Contact name:Max Tsui
Trigonpower International Trade Ltd. |
|
|
heat / fire resistance Oven Ignition Unit 02_0_D style_IGR04
Easy to install, clean, and maintenance
We set a elastic snap joint device on the igniter unit, so you could easily install it in the gas cooker or remove it from the gas cooker. On the appearance of gas burner, we usually set the special position to install the spark plug. The appearance size of the spark plug is suitable for the install hole. So you could easily install the spark plug in the gas burner.
The igniter unit is a sealed box, it could keep things like dust out.And the surface of the product is very smooth, it is convenient for clean and maintenance.
Specification:
| TYPE | HIGH-VOLTAGE PULSE |
| APPERANCE STYLE | D-STYLE |
| PRODUCT CODE | IGR04 |
| OUTLET QUANTITY | 4/6/8 |
| WORKING VOLTAGE | AC 110~127V / AC 220~240V |
| WORKING FREQUENCY | 50 / 60 HZ |
| NOMINAL OUTPUT POWER | 0.6VA |
| OUTPUT PULSE VOLTAGE | > 18KV |
| PULSE FREQUENCY | 1~2 / 3~6 / 6~9 / >9 HZ |
| PULSE SPARK LENGTH | >6MM |
| GLOW WIRE TEST | GWT 850 & GWIT 775 (IEC60335-1 PART 30.2) |
| FLAME CLASS | UL-94-V0 |
| INPUT TERMINAL | FASTON 6.3 X 0.8 |
| OUTPUT TERMINAL | FASTON 2.8 X 0.8 |
| GROUND CONNECTOR | YES |
Applications:
1. Freestanding Oven
2. Gas Cooker
3. Other Home Appliances
Full range of product
1) Igniter unit
A install mode is a standard mode;
D install mode is a special mode for Europe market;
H install mode is a compact mode for Middle-east market, especially in Turkey market.
Good safety properties
1) Good high voltage resistance.
All of the shielding parts have good insulation properties.
| COMPONENTS | RAW MATERIAL | VOLTAGE. RESISTANCE |
| Housing | nylon (PA66) | > AC 600V |
| Potting material of igniter unit | EPOXY | > AC 600V |
| Head part of spark plug | 95% AL2O3 ceramic | > 18KV DC |
| Wire of spark plug | Copper+teflon | > 18KV DC |
2) Good heat and fire resistance.
All of the non-metallic material could pass the heat and fire resistance test of GWT 750 and GWIT 775.
Working stably under high temperature
The raw materials of the parts for ignition combination all have good high temperature resistance properties. So the ignition combination could work stably under the high temperature, at least 200 degrees centigrade.
| COMPONENTS | RAW MATERIAL | TEMP. RESISTANCE |
| Housing, coil frame | nylon (PA66) | >200 ℃ |
| Enameled wire of coil | Copper+teflon | >200 ℃ (Teflon) |
| terminal | Galvanized steel | >1500 ℃ |
| Potting material of igniter unit | EPOXY | >200 ℃ |
| Head part of spark plug | 95% AL2O3 ceramic | >1600 ℃ |
| Wire of spark plug | Copper+teflon | >200 ℃ (Teflon) |
