Home Companies Tianjin Estel Electronic Science and Technology Co.,Ltd

19 Inch Rack Outdoor Power Cabinet Waterproof and dustproof IP55

Contact Us

[China]

Trade Verify

Address: Shenzhen, China

Contact name:Fiona Liang

Tianjin Estel Electronic Science and Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

19 Inch Rack Outdoor Power Cabinet Waterproof and dustproof IP55

Country/Region	china
City & Province	shenzhen guangdong
Categories	Mobile Phone Chargers

Product Details

Air Conditioner Type Outdoor Power Cabinet For Installing 19” Equipment and Battery, Waterproof, Dustproof

1.Quick Details

Place of Origin: Shenzhen, China (Mainland)	External Dimension: W×D×H 750×750×1750mm Internal Dimension: W×D×H 650×650×1450mm
Band Name: ESTEL	Structure: double wall, with insulation, s sandwich structure
Model Number: ET7575175-UP	Cabinet Layout: one compartments: the upper part is equipment compartment, the lower part is battery compartment
Product Name: Outdoor Power Cabinet	Cabinet Lock: anti-theft three point lock
Certification: ISO9001, CE, 3C, FCC, TLC, IP55	Protection Level: IP55
Application: outdoor telecom base station	Cable Entry: at cabinet bottom
Material: galvanized steel	Illumination: DC48V LED lamp
Heat Insulation: PEF	Grounding Protection: copper bar
Color: grey (support custom made)	Cooling: AC220V air conditioner and DC48V thermoelectric cooler / peltier air conditioner
Coating: anti-corrosion outdoor powder coating	Accessories Options: PDU, rectifier system, environment monitoring system

2. Technical Parameters

Item	Type	Technical Parameter
Structure	Dimension	External Dimension: W×D×H 750×750×1750mm Internal Dimension: W×D×H 650×650×1450mm
	Layout	1 compartment
	Equipment Installation Method	Upper compartment: 19” rack; Lower compartment: battery shelf.
	Door	With one front door, and special lock for outdoor cabinet (support padlock)
	Material	Galvanized steel, 1.5mm thick outer plate, 0.8mm thick inner plate
	Heat Insulation	There are heat insulation between inner wall and outer wall. The insulation material is 20mm PEF.
	Ingress Protection	IP55
Temperature Control	Cooling	AC220V air conditioner and DC48V TEC air conditioner
Lightning Proof	Grade B lightning proof	Nominal: 60KA, Max.: 100KA
Lighting	LED lamp	48V LED lamp
Temperature	Temperature	Working Temperature: -40°C ~ +55°C
		Storage Temperature: -50°C ~ + 70°C
		Transport Temperature: -50°C ~ +70°C
Humidity	Relative Humidity	5% ~ 100%
Pressure	Air Pressure	62kpa ~ 101kpa (similar to 0m ~ 5000m altitude)
Radiation Intensity	Solar Radiation Intensity	1120 ×(1±5%)W/m2

3. Application

The ET7575175-UP outdoor power supply cabinet is mainly used in wireless communication base station, such as 4G system, communication/network integrated service, access/transmission switching station, emergency communication/transmission, etc.

4. Features

The cabinet is dustproof, sunproof and rainproof, which is used in outdoor environment.
Cabinet cooling: air conditioner. MTBF≥50000h.(other option: heat exchanger and fans).
Including -48VDC illumination LED lamp.
The cabinet includes power and environment monitoring unit, which can send power failure alarm, door open alarm, temperature and humidity alarm, smoke alarm, water alarm etc.
The layout of the cabinet is reasonable, which will facilitate cable access, fixing and grounding. At the bottom of the cabinet, there are cable inlets separately for power cable, signal cable and optical cable.
All the cables, sealing and heat insulation used in the cabinet are made from flame retardant materials.
The cabinet includes 19” standard installation rack and battery shelf.
Surface treatment: degreasing, derusting, rustproof phosphating (or galvanizing), powder coated.
Cabinet load bearing: ≥600kg
Flame retardance: comply with GB5169.7 test A
Insulation resistance: the insulation resistance between grounding devices and cabinet body parts is not lower than 2×104M/500V(DC).
Withstand voltage: the withstand voltage between grounding devices and cabinet body parts is not lower than 3000V(DC)/1min.
Mechanical strength: each surface can bear upright pressure >980N; after the door is open, its outer end can bear upright pressure >200N.

5. Components Installation

5.1 LED lamp, LED lamp sensor, smoke sensor, door sensor and temperature & humidity sensor are installed at the top of the cabinet.

5.2 Water sensor is installed at the bottom of the cabinet.

5.3 PDU, environment monitoring unit and rectifier system are installed on 19” rack.

5.4 The cabinet includes totally two air conditioners, installed on front door.

6. Cable Inlet

Feeder cable and other external cables all use bottom wiring method.

7. Grounding Protection

The cabinet includes grounding copper bar with anti-corrosion coating. There are enough screws for wiring connection terminals.
The metal part of the cabinet should be interconnected and be connected with grounding bar. Connection resistance between any two points is lower than 0.1Ω.
Protective earthing of other equipments inside the cabinet should be connected to the grounding bar.

8. Theft Proof Design

8.1 Door lock theft proof design

Damage resistance of the theft proof lock meets GA/T 73-1994 “Mechanical Anti-theft Lock” class B requirement, supporting padlock.

Three point lock

8.2 Connection and Fastening

Use anti-loose threaded connection as structure and bearer connection. Anchor bolt for fixing cabinet use hot dip galvanized bolts.
Door hinges use inner hinge mode.

8.3 Appearance and Surface Treatment

Cabinet surface coating is outdoor special powder coating, with white gray color (PANTONE 428C). The coating complies with GB/T 3181-2008 requirement.

9. Our Contact Information

Mobile Phone: 0086-13752765943

Telephone: 0086-0755 23592644

Email: info@estel.com.cn

lxf.estel@hotmail.com
Skype: fiona.liang10