Fiber Realtime Optical Line Protection Switch OLP System 125um

OLP System with Real-time Fiber Power Monitoring and automatic Switching

Optical Line Protection Equipment (OLP) is a kind of equipment used in the field of optical fiber communication to switch between the main and standby optical paths. It can automatically identify the optical signal status of the main and standby optical fibers, and perform instantaneous switching of the optical paths. Prevent the normal operation of communication when the main optical cable has a full-blocking obstacle. The optical path protection equipment mainly has the functions of real-time monitoring of optical power, optical path switching, and alarms. The port that establishes the route is transparent to the speed and interface, and its switching route is established in the optical domain.

Product Features

• Automatic switching protection: After the line is interrupted, the system automatically quickly switches the faulty optical fiber main route to the backup route to ensure uninterrupted services, increase the reliability of the transmission network or line quality, and improve the service quality of operators. l
• Fast switching speed: switching time <30ms, shortening communication interruption time, and improving maintenance efficiency. l
• Fiber quality real-time monitoring: Provides real-time monitoring of the main and standby fiber cores, that is, the optical power monitoring of the main and standby fiber (transceiver) dual fibers at the same time, which can monitor the quality of the optical cable of the main and standby routes, which can effectively avoid the simultaneous blocking of the main and standby route fibers Case. l
• Emergency dispatch of active and standby routes: Arbitrary dispatch of active and standby working routes under the premise of ensuring that the business is not interrupted, without the need to manually dispatch on the on-site ODF, which saves time and is safe and convenient. l
• Low insertion loss: 1+1≤4dB, 1:1≤1.5dB working mode can be set: support manual switching, automatic switching can be set l
• Support switching threshold can be set: the main and standby route switching threshold can be set according to the line condition l
• Manual return to automatic delay: the time for manual mode to return to automatic mode can be set according to requirements l
• Support automatic switchback delay setting: the main route failure repair and automatic return to the main route delay can be set as needed

Product Application

• Optical line automatic switching protection

• Real-time power monitoring

• Support automatic switching of primary and secondary routes

Product Specification