|
[China]
Trade Verify
Address: NO.9, Hongfeng 1st Street, Nanshe Village, Chashan Town. Dongguan City, 523391, China
Contact name:Aaron
Dongguan Ruichen Sealing Co., Ltd. |
|
Verified Suppliers
|
|
|
Black nbr Lip Seal Hydraulic Seal For Hydraulic Pump Oil Resistance
Lip seal usually used for both dynamic and static applications, especially for hydraulic pumps. And NBR (nitrile rubber) is widely used and cheapest material.
Material Description:
| Material | NBR(Nitrile Rubber/Buna-N) |
| Advantages | 1,Excellent Abrasion-Resistance,Good Rebound Resistance |
| 2,Good Tensile Strength and Elongation | |
| 3,Excellent Animal and Vegetable Oil Resistance | |
| 4,Good Oil and Fuel Resistance | |
| 5,Good Water Resistance | |
| Disadvantage | 1,Poor Oxygenated-Solvent Resistance |
| 2,Poor Ozone Resistance | |
| Temperature | -40℃-100℃, -55℃-120℃(special formula) |
| Application | 1,Fuel tank, lubricating oil tank and oil in the hydraulic oil, gas, water, silicone grease, silicone oil and other fluid medium rubber parts, especially the sealing parts. |
| 2,It is currently the most widely used, the lowest cost of rubber seals. |
OEM Flow:
Lip seal is customized products in our factory. and the flow as bellow:
1, Drawings or samples from customers.
From drawings or samples we can know the sizes and material.
2, Make mold (tooling) .
We make molds according to samples or drawings.
3, Make samples and send them to customers.
Before mass production, we have to make samples and confirm the samples.
4, Mass production after samples confirmed.
During mass production, we can control the quality.
5, Packing & shipment.
PE bag inside, Carton outside. Carton sizes: 46cm*33cm*33cm, 33cm*33cm*33cm, if large quantity we will put the cartons on pallets.
6, After-Sales Service.
If any quality problems you can come back to me.
Products Show:
Item Name: Lip seal / Hydraulic Seal , Material: NBR, Color: Black
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao
City, Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you
can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before
shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your
requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
