|
[China]
Trade Verify
Address: NO.9, Hongfeng 1st Street, Nanshe Village, Chashan Town. Dongguan City, 523391, China
Contact name:Aaron
Dongguan Ruichen Sealing Co., Ltd. |
|
Verified Suppliers
|
|
|
| FKM product | Silicone product | NBR product | HNBR product | EPDM product | NR product | Peoprene product | |
Abbreviation | FKM | silicone | NBR | HNBR | EPDM | Nature rubber | Neoprene |
Durometer(shoreA) | 60-90 | 30-90 | 20-95 | 50-90 | 30-90 | 20-90 | 20-95 |
Tensile(P.S.I) | 500-2000 | 200-1500 | 200-3000 | 2600 | 500-2500 | 500-3500 | 500-3000 |
Elongation(Max.%) | 300 | 700 | 600 | 530 | 600 | 700 | 600 |
Compression set | good | Good | Good | Excellent | Good | Excellent | Good |
Resilience-Rebound | Fair | Good | Good | Excellent | Good | Excellent | Excellent |
Abrasion Resistance | Good | Fair to poor | Excellent | Excellent | Good | Excellent | Excellent |
Tear Resistance | Good | poor | Good | Excellent | Fair | Excellent | Good |
Solvent Resistant | Excellent | poor | Good to excellent | Good | Poor | Poor | Fair |
Oil Resistant | Excellent | Fair to poor | Good to excellent | Excellent | Poor | Poor | Fair |
Our factory introduction:
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao
City,
Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you
can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before
shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your
requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
