Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
Protection level IP66 industrial encoder K52 rotary encoder through hole 14mm
Product Description
K52 series Key Features:
Encoder type: Incremental encoder
External diameter: 51mm
Thickness: 39mm
Installation dimension: R27.5mm(spring plate 50T55)
Hollow shaft type: through hole or blind hole
Hollow shaft diameter: 8mm,10mm,12mm;14mm;15mm
Supply voltage: DC5V ; DC8-30V
Product Basis information of K52 incremental encoder
Items | Basic parameters |
Brand | HENGXIANG |
Encoder type | Incremental encoder |
External diameter | 51mm |
Resolution | 1000;1024;1200;1250;1440;2000;2048;2500;2880;3000;3600; |
| 4096;5000;5760;8192;10000；11520；16384；20000；23040 |
| 1000/4;1000/6;1000/8;1024/4;1024/6;1024/8;2048/4;2048/6; |
| 2048/8;4096/4;4096/6;4096/8;8192/4;8192/6;/8192/8 |
Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
Supply voltage | DC5V ; DC8-30V |
Outlet type | Cable out from back |
| Socket out from back |
| Cable out from back with socket |
Output mode | NPN/PNP(Open Collector Output) |
| Voltage output |
| Push-pull output |
| line drive (26LS31) TTL |
| line drive(DC8-30V) HTL |
| TTL(DC5V) phase ABZ are back of phase UVW |
Sock(endure) | 490m/s2 ,11 ms three times for X,Y,Z direction individually |
Shaft Material | Stainless steel |
Shell Material | die cast aluminum |
Cable length | 1000mm(cable with shielding) |
Protection grade | IP50 ; IP65 |
Why choose us?
HENGXIANG brand--The trustworthy partner
CE approved--advantaged product quality;
Fast delivery--strong stock product ability;
Factory directly provide a competitive price;
One-stop service--for your efficient purchasing experience;
OEM design accepted--customized design, your own brand accepted.
Signal Circuit of encoder
1. The NPN Open Collector -- The NPN Open Collector(NPN) is an interface based on an output circuit with an NPN transistor.
An open collector is the unconnected collector connection of an NPN transistor, whose emitter is connected to earth and whose collector is connected to the output.
2. PNP output
The PNP output is an interface based on an output circuit with a PNP transistor.
3. Push-Pull output(HTL)
High Voltage Transistor Logic functions with a voltage supply in the range 10 and 30 V DC, with 24 V DC being the most usual.
“Low” is defined as an output of between 0 V and 3 V and “high” as between VCC and VCC - 3.5 V.
4. TTL RS-422 output
In a transistor-transistor logic (TTL), both the logical status and the amplification are done by transistors, hence the name.
The TTL output is supplied with either a fixed 5 V voltage or a variable voltage of between 10 and 32 V. For this the low range is defined as the ≤ 0.4 V and the high range as ≥ 2.4 V.
Matters needing attention
1. Must choose the power supply voltage: DC5V or DC8-30V
2. Must choose leaf spring plate model number if you select hollow shaft encoder
3. Please advise the motor speed (RPM) that you actually use
4. If you have any other requirements, please provide detail parameters
