Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
128 steps per turn 7 bits gray code output single turn absolute encoder SJ38 shaft 6mm
Quick description of SJ38 encoder
Protection grade: IP50 ; IP65
Allowable ripple: ≤3%rms
Load Voltage: ≤DC30V
Insulation strength: AC500V 60s
Precision :360/(resolution x 4)
Installation dimension: 30mm diameter
Shaft length: 13mm
Solid Shaft diameter: 6mm D shape
Why choose us?
HENGXIANG brand--The trustworthy partner
CE approved--advantaged product quality;
Fast delivery--strong stock product ability;
Factory directly provide a competitive price;
One-stop service--for your efficient purchasing experience;
OEM design accepted--customized design, your own brand accepted.
Product introduction for
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | absolute encoder |
| Radial cable | |
| Radial socket | |
| axial cable with plug | |
| Radial cable with plug | |
| Count direction | counterclockwise |
| outside control direction | |
| clockwise | |
| Interface | NPN low level effective |
| NPN high level effetive | |
| Protection grade | IP50 ; IP65 |
| Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) | |
| Consumption current | 100mA MAX |
| Top response frequency | 100KHZ |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| Output code | gray code |
| Precision | 360/(resolution x 4) |
| Insulation strength | AC500V 60s |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
| starting torque | less than 4.4x 10-3N.m |
| Intertia moment | less than 1.5x 10-6kg.m2 |
| Shaft load | Radial 30N; Axial 20N |
| Top REV | 3000RPM ;IP65≤2000 RPM |
Our Service
Production date
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Package
Each single encoder is packed into a single safe carton with protecting bubble.
Then all encoders will be put into a bigger carton to prepare shipment.
About Encoder Vibration
Vibration acting on an encoder always cause wrong pulse easily.
So we have to pay more attention to encoder working place.
The more pulse per round, the narrower groovy spacing of grating, ore effect to encoder by vibration, when motor speed is low or even stopped, vibration acting on encoder shaft or encoder shell would cause grating vibration, in this way, encoder might show wrong pulse signal.
Production Catalogue
If you have already selected the encoder model you are going to order, please email us directly or contact online service right now to get the latest catalogue.
But if you are still have any doubts on choosing a right encoder model number, you are also free to contact us to get the related catalogue.
More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.
