Active Member
|
[China]
Contact name:Fang
Shanghai Hengxiang Optical Electronic Co., Ltd. |
|
|
K76 optical rotary encoder large aperture encoder hole 30mm thickness 28mm
Product introduction
Hollow shaft type:through hole (clamping ring at prior and clamping ring at rear)
Supply voltage:DC5V ; DC8-30V
Outlet type:Cable out from side
Consumption current:100mA MAX
Top response frequency: 300KHZ
GND: not connect to encoder
Bearing life: 1.5x109 revs at rated load(100000hrs at 2500RPM)
Environmental temperature: Operating:-20 ～+85°；storage:-25 ～+90°
Environmental humidity: Operating and storage: 35-85%RH (noncondensing)
Specifications Parameter table
| Items | Basic parameters |
| Encoder type | Incremental encoder |
| Brand | HENGXIANG |
| External diameter | 76.5mm |
| Thickness | 37mm |
| Installation dimension | R34.5mm(spring plate 76T69) |
| Output phase | Phase A+,B+,Z+,A-,B-,Z-,U+,V+,W+,U-,V-,W- |
| Supply voltage | DC5V ; DC8-30V |
| Outlet type | Cable out from side |
| Output mode | NPN/PNP(Open Collector Output) |
| Voltage output | |
| Push-pull output | |
| line drive (26LS31) TTL | |
| line drive(DC8-30V) HTL | |
| Consumption current | 100mA MAX |
| Allowable ripple | ≤3%rms |
| Load Voltage | ≤DC30V |
| GND | not connect to encoder |
| Mark to Space ratio | 45% to 55% |
Our advantage
Quick Response time
Utility Model Patent Certificate
Own brand and unique brand
CE certification for all models
Prompt delivery date
100% full inspection before shipment
FAQ
Q: How to get the latest price?
A: Contact us and tell me the encoder model selection.
Q: How to select a right encoder model?
A: A right encoder model is based on different applications and parameters, you could contact us for technical support if you have any query.
Q: Do you offer technical support?
A: Yes, we have professional technician who can solve all your doubts.
Q: What parameters are requested before ordering an encoder?
A: You should get some basic parameters before you start to order. Such as installation dimensions, resolutions, circuit signal, power supply voltage, etc.
If you have any doubt on selecting the model, you are welcome to contact us for more assistant.
Q: Where is your factory?
A: Our factory is located on Shanghai City.
Production date
3-5 working days for sample after full paid
7-15 days for mass production after full paid
Encoder Technical Theory
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Output drivers:
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Shipment
1. Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
2. You could select the express according to your requirements if freight collector
3. If you do not have any courier account, we will check and find a cheapest and safety express for you.
4. Our factory has 30% discount with most courier company, so price could be as cheap as possible.
Package
Each single encoder is packed into a single safe carton with protecting bubble.
Then all encoders will be put into a bigger carton to prepare shipment.
