Bidirection SFP+ Manufacturer Fiber Optical Transceiver Single SFP+ BIDI 10G 100KM

100KM 10Gb BIDI SFP

Tx: 1490nm/ Rx: 1550nm BIDI SFP+ Transceiver for 10GbE

Tx: 1550nm/ Rx: 1490nm BIDI SFP+ Transceiver for 10GbE

Features

Supports 9.95 to 11.3Gb/s bit rates

Simplex LC Connector

Hot pluggable SFP+ footprint

Cooled C-band DWDM EML transmitter, APD receiver

Applicable for 100km SMF connection

Low power consumption, < 1.5W

Digital Diagnostic Monitor Interface

Electrical interface compliant to SFF-8431

Commerical:0 to 70 °C

Applications

10.3125Gbps Ethernet

Other optical link

PRODUCT DESCRIPTION

           HILINK's HLxx1XL-CD100 series single mode transceiver is small form factor pluggable module for optical data communications. It is with the SFP+ 20-pin connector to allow hot plug capability. The HLxx1XL-CD100 module is designed for single mode fiber and operates at a nominal wavelength of DWDM C-band; The transmitter section uses a DWDM EML laser, which is class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section consists of a APD photodiode integrated with a TIA.

Also for 1.25Gbps

General Operating Characteristics

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER=9; BER<10^-12; 2^{31 – 1} PRBS.

Ordering Information