|
[China]
Trade Verify
Address: No.1003-1005.Jinhua Building. Taoxia Village, Gaofeng Community, Dalang Street, Longhua District Shenzhen China.
Contact name:Susan Cheng
Carefiber Optical Technology Co., Ltd |
|
Verified Suppliers
|
|
|
48 Core 2 Ports Dome Type Mechanical Sealing Waterproof outdoor fiber optic splice kit
Dome Type Mechanical Sealing Waterproof Outdoor Fiber Optic Splice Kit is the equipment used to offer room for fusion splicing optical fibers. It also provides protection for fused fiber joint point and fiber cables.
There are mainly two types of closures: vertical type and
horizontal type. A large variety of fiber splice closures are
designed for different applications, such as aerial, duct fiber
cables and direct burial. Generally speaking, they are usually used
in outdoor environment, even underwater.
The ordinary carefiber series optical fiber joint closure appy
to cable splicing. Direct burial, manhole, hand hole, wall hanging
and aerial placing method is adopted. It provide reliable, solid
and flexible protection and helpful to environment protection.
● This carefiber series Dome Type Mechanical Sealing Waterproof outdoor fiber optic splice kit use imported enhanced plastic with ageing resistance. It's fastener is made of quality stanless steel material.
● The splicing coiling adopt overlay flip structure and doesn't
need to disassemble other coiling splicing.
● It features reliable and easy-to-use dome-to-base clamping
system. It use unique sealing technology instead of heat shrink.
● The single seal slides easily into the closure's base for rapid,
secure installation. It require no special tools to install. It is
easy to remove cables and completely re-usable.
● Temperature range: -10~+65 degree celsius
● Environmental temperature sealing
inflation pressure 100Kpa±5Kpa and sink in clear water and observe 15 minutes, no bubble and pressure has no change.
● Insulation resistance: ≥2x104MΩ
1.Dome Type Mechanical Sealing Waterproof outdoor fiber optic
splice kit usually includes: end plate, splice tray organizer,
fiber splice tray, cover, cable grommets, grommet retainer,
mounting bracket and misc. hardware.
2. Fiber Cable Sheath Preparation
(1) Expose the rip cord. This step involves marking the location
with a tape marker, ring-cutting the outer jacket shaving off the
outer jacket to expose the rip cord.
(2) Remove the outer sheath. This step involves making a
longitudinal slit down the outer sheath,peeling off the outer
jacket and corrugated metal, and cutting the rip cord flush with
the end of the corrugated metal.
(3) Rewove the inner jacket. This step involves using the rip cord
under the inner jacket to slit it, cutting aramid yarns, cutting
central strength member, and cleaning the filling compound.
3. Bonding and Grounding Hardware Installation This step involves
sliding the cable clamp over sheath, sliding the bond shoe under
the corrugated metal, placing the bond plate over the bond shoe ans
securing the sheath grip.
4. Assembly of Cables to Closure The preferable location for the
two main cables is in the lower end plate port. If a third or
fourth cable is required, it is easier to install it in the upper
end plate port as a branch cable. This fiber optic splice closure
is designed for two cables in each of its two ports. If only one
cable will be installed in a port, the provided rubber grommet plug
is used to substitute for the second cable.
(1) Install Cables to End Plate. this step involves unscrewing knob
and removing grommet retainer, positioning the end plate assembly,
attaching the sheath grip to dielectric cables, sliding cables and
sheath grip through, and securing sheath grip to backbone.
(2) Grommet Installation and External Grounding. This step involves
applying Bsealant, pushing the grommets into the end plate port,
and applying more B-Sealant.
(3) Fiber unit Preparation and Distribution Organizer Installation.
This step involves removing more loose tubes,separating each
cable’s loose tube into two groups, positioning the distribution
organizer, securing the loose tubes.
(4) Splice Tray Installation. This step involves placing the splice
tray, fastening the end of the splice tray to the organizer, and
installing cables, grommets and external ground.
(5) Optical Fiber Splicing. This step involves splicing holder
placing, fiber splicing and fastening the splice holder lid.
5.Fiber Optic Splice Closure Cover Installation.
6.Closure mounting
7.Reentry
For more: please contact us through e-mail, websit, phone.
