Active Member
|
[China]
Address: NO.68,HuaQiao Road,JinCheng,Lin'an,Zhejiang,China,311300
Contact name:James Xu
HANGZHOU ZION COMMUNICATION CO.LTD |
|
|
Directly by the manufacturer for your service!
Wechat: xyy71630
Email: james@zion-communication.com
Factory Direct Sale Quality Assurance
zion High quality 24 awg sftp cat5e cables 0.5 copper braid pet 4 Pairs twisted PE jacket outdoor Fluke black color
Characteristics
Fast and reliable connection
Twisted pairs with bright color for easy recognition
Ripcord and foot-mark for convenient use
Smooth PVC jacket for easy pulling in tight space
Colors: Light gray, blue, white or as per customer's requirements
Test method and Mechanical Characteristic
Pair identification:
Pair1= Blue/White-blue
Pair2= Orange/White-orange
Pair 3= Green/White-green
Pair4= Brown/White-brown
Outer jacket: PVC
Jacket color: Grey/blue/white or as your requires
Installation temperature: 0°C to +60°C
Operating temperature: -20°C to +75°C
DC resistance unbalance :5%
Pair-to-ground capacitance unbalance: 330 pF/100m
Capacitance: 14pF/ft nominal
Pulling strength: 130 N
Minimum bend radius: 4 outer cable diameters
Dielectric breakdown: 1000 Volts DC conductor to conductor
Velocity of Propagation: PE=65%
Maximum skew: 45ns@100 meters
4pairs 4*2*0.50mm pure copper or CCA or CCS, PE insulation 1.02mm+ rip code+ PVC jacket, light grey or white
Conductor:
Material: solid bare copper
Number of pairs: 4 pairs
AWG: 24awg
Conductor diameter: 0.50±0.003mm
Insualtion:
Material: HDPE and FRPE
Diameter: 0.924±0.005mm
Average thickness: 0.212mm
Minimum point thickness: 0.2095mm
FILLING: petrolatum or without jelly filled
Sheath:
Material: HDPE
Nominal diameter: 6.5±0.2mm
Average thickness: 1mm
Minimum point thickness: 0.9mm
Operating temperature range: -20 to 75°C
Minimum bend radius (install): 8xOD
Flame test: CMX, CM, IEC60332-1
Reference standard: TIA/EIA568B, IEC/ISO11801
Comparison of UTP/FTP/SFTP
| Price | High | SFTP>>FTP>>UTP | Low |
| Flexible | Flexible | UTP>>FTP>>SFTP | Inflexible |
| Didturbance resistant | good | SFTP>>FTP>>UTP | Bad |
Comparision of Cat5e&Cat6
| Cat5e | Cat6 | |
| Maximum length | 100m | 100m |
| Bandwidth | 100Mhz | 250Mhz |
| Disturbance resistant | Normal | Good |
| Suitable for | 100BASE-TX (Fast Ethernet) | 1000BASE-T (Gigabit Ethernet) |
| Diamater | 5.2mm | 5.8mm |
| Theoretical download | 12.8 M/s | 128 M/s |
How to choose Cat5e&Cat6?
As we kow,Cat5e can only "support" the Giabit the Ethernet while the Cat6 is "truly guaranteed " to make full use of the
Gigabit Ethernet.
About Cat5e system
1000Base-T is the standard applied by the Cat5e system during the Gigabit Ethernet transaction, which could run
properly on the Cat5 Twist-Pair that meets the standard of ANSI/TIA/EIA-568A (1995).1000Base-T would finish the data transaction by applying to 4 pairs of Cat5 Twist-Pair and each of them is responsible for a 250Mbps data flow. However, as the designed bandwidth is only 100MHz
for the Cat5 & Cat5e Twist-Pair, it must satisfy some special requirements to achieve the two-way transmission within the 1000Mbps network.
About Cat6 system
1000BASE-Tx is the working style for Cat6 system. Similarly, 1000Base-Tx works on the basis of 4 pairs of
Twist-Pair; but two of them are for sending while the other two are for receiving(similar to the 100Base-TX, who sends and receives data respectively by two Twist-Pair). Each pair of cables doesn’t conduct a two-way transmission themselves; therefore the crosstalk between cables decreases greatly, along with a relatively
simple coding way. Such kind of technology has a lower requirement on the network interface. It doesn’t require quite a complicated circuit design thus the cost on network interface is decreased. Whereas, along with
the efficiency decrease of the used cables (two for sending and two for receiving), the bandwidth is required to
be over 100mhz so as to achieve a 1000mbps transmission speed;i.e. such kind of network is not supported in
the Cat5&Cat5e system but will only be supported by the Cat6 system.
..Transmission Mode of Cat5e & Cat6
Certifications
Production Flow
ZION COMMUNICATION is a professional signal products and security system products provider. We believe on investing and building strong R&D capabilities for new technology and innovation.We have a strong R&D team and skilled workers, also with the advanced machines and modern factories which can provide our customers with outstanding quality, service.
A highlight of ZION COMMUNICATION is its emphasis on Quality
Control, Quality Audit and Quality Assurance in the spheres of
manufacturing activities and service, i.e. from RAW MATERIAL TO
FINAL PRODUCTS to CUSTOMER SUPPORT SERVICES.
Electrolytic Copper & Aluminum ensures longer life for
conductor. Bunching/twisting of ministrants as per international
standards.Proper annealing gives softness & flexibility.
Competitive Advantage
1, From raw materials to final products, we perform intense quality checks to maintain our product quality:
A, Incoming material inspected by QC.
B, Manufacturing Process Control
C: Workers trained daily/weekly/monthly
D: Work instructions manual at each work station
E: 5S system implemented
F: Machine maintenance procedure
G: Quality Control and Final Inspection
The QC staff will check the material, process product
and final product according to the specification or test procedure.
2, Our R&D efforts center on reinforcing and developing element technologies
needed to support the future growth and success for customers and KINGTONE.
3, We know customers have urgent needs.
We are skilled at effective communication to interact with customers.
In order to provide prompt service, we can answer for you 7*24 hours.
Q1:Can I add my logo on the cable?
A:Yes,OEM are available for us.But you should send us the Trademark authorization letter.
Q2 :Do you have inspection procedures for optic cable? A:100% self-inspection before packing.
Q3:Can we mix the 20ft container?
A: Yes,if the items are meet our min order qty.
