Active Member
|
Address: ADD: 18F Tower C, Winning Ocean Plaza, No. 680 South Maanshan Rd, Hefei 230041, China
Contact name:Jack
ANHUI ELITE INDUSTRIAL CO.,LTD |
|
Concrete Admixture Water Reducer Sodium Naphthalene Sulfonate
Formaldehyde SNF Powder
1. SNF Introduction
Naphthalene formaldehyde sulphonate water reducing agent is a
synthetic powder based onbeta-sulphonate formaldehyde
ondensate and reactive polymer.It has the properties of high range
water reduction, set retarding and excellent strengthening.
Elt-nsf sodium sulfate is less than 10% , suitable to middle
strength or high strengthconcrete where high range water reduction
is desired.
2. SNF Specification
| INDEXITEM | Elt-A | Elt-B | Elt-C |
| Appearance | Light brown powder | Light brown powder | Light brown powder |
| Solid Content | ≥92 | ≥92 | ≥92 |
| Sodium sulphate Content | 5% | 10% | 20% |
| Chloride Content | 0.3% | 0.4% | 0.5% |
| PH Value | 7-9 | 7-9 | 7-9 |
| Net Starch Fluidity | ≥250 mm | ≥240 mm | ≥230 mm |
| Surface Tension | 70±1×10-3N/M | 70±1×10-3N/M | 70±1×10-3N/M |
3. SNF Package
25kgs/Bag or Ton bag,16Tons/20'gp
4. SNF Application
A. Used for and widely for self-cured, vapor-cured concrete and its
formulations. At the early stage of application, extremely
prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is
omitted in peak-heat summer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material
is consumed.
B.Suitable for preparation of early-strength, high-strength,
high-anti-filtration and self-sealing& pumpable concrete.
C.Widely used in pre-cast & ready-mixed concrete, armored
concrete and pre-stressed reinforced concrete in key construction
projects such as dam and port construction, road building &
town planning projects and dwelling erections etc.
D.Compatible with Portland cement, normal Portland cement, Portland
slag cement, fly-ash cement and Portland pozzolanic
cement etc.
5. SNF USAGE:
A. Blending dosage at 0.5%-1.0%, 0.6% mixing dosage advised.
B. Prepare solutions as required.
C. Direct use of powder agent is allowed. Alternatively the
addition of the agent is followed by water moisturization
(water-cement ratio:60%).
6.Parameters&accepttance criteria(For reference)
A.Elt-A
| Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
| Water reduction,Min % | ≥14 | 18-28 | Compression strength,% | 1d | ≥140 | 170 | |
| Water Penetration,Max % | ≤90 | 79 | 3d | ≥130 | 160 | ||
| Air Content,% | ≤3.0 | 1.6 | 7d | ≥125 | 145 | ||
| Temporal distribution for setting(min) | Initial setting time | -90 ~ +120 | | 28d | ≥120 | 135 | |
| Terminal setting time | Shrinkage,% | | | | |||
| Corrosion to steel bars | None | None | |||||
| Note:Standard Blend Dosage:0.75%(as cement amount) | |||||||
B.Elt-B
| Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
| Water reduction,Min % | ≥14 | 17-25 | Compression strength,% | 1d | ≥140 | 165 | |
| Water Penetration,Max % | ≤90 | 80 | 3d | ≥130 | 155 | ||
| Air Content,% | ≤3.0 | 1.6 | 7d | ≥125 | 140 | ||
| Temporal distribution for setting(min) | Initial setting time | -90 ~ +120 | | 28d | ≥120 | 130 | |
| Terminal setting time | Shrinkage,% | | | | |||
| Corrosion to steel bars | None | None | |||||
| Note:Standard Blend Dosage:0.75%(as cement amount) | |||||||
C.Elt-C
| Parameters | Criteria | Actual Results | Parammeters | Criteria | Actual Results | ||
| Water reduction,Min % | ≥14 | 16-22 | Compression strength,% | 1d | ≥140 | 160 | |
| Water Penetration,Max % | ≤90 | 85 | 3d | ≥130 | 150 | ||
| Air Content,% | ≤3.0 | 2.0 | 7d | ≥125 | 140 | ||
| Temporal distribution for setting(min) | Initial setting time | -90 ~ +120 | | 28d | ≥120 | 125 | |
| Terminal setting time | Shrinkage,% | | | | |||
| Corrosion to steel bars | None | None | |||||
| Note:Standard Blend Dosage:0.75%(as cement amount) | |||||||
7, Our Company:
Anhui Elite Industrial Co.,LTD was established in 2007, has become one of the leading and professional suppliers of all
kinds of Concrete additive in the world market.Our Product were widely used in all kinds of concrete,mortar,plaster projects
and exported to more than 30 countries, Such as USA,Russia, Germany, Australia, Chile, UAE, Korea, Vietnam, Africa etc.
Our Product was made by 100% Virgin Material with advanced equipment , we have one full set of precise testing instrument,
testing equipment and quality inspection team, technology research and development team. the management system was
certified by ISO9001 and our products have been passed the CE Certification.
Our Mainly Product and Production Capacity as below:
Main Item | Capacity/Annual | ||
Polypropylene Fiber (PP Fiber) | 15000mts | ||
Polyester Fiber(PET Fiber) | 6000mts | ||
Polyvinyl Alcohol Fiber( PVA Fiber) | 30000mts | ||
Polyacrylonitrile Fiber(PAN Fiber) | 6000mts | ||
Naphthalene Formaldehyde Sulphonate(SNF) | 300000mts | ||
Polycarboxylate Superplasticizer PCE(Flake/Powder/Liquid) | 150000mts | ||
Foam Agent | 30000mts | ||
| Sodium Gluconate | 200000mts |
8, Related Product:
