Advanced Instruments Co.,Ltd |
|
Introduction:
This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 °C and 79 °C (100 °F and 175 °F) under the prescribed laboratory conditions. It is not to be considered the equivalent of service evaluation tests. Precision and bias was determined using grease ranging from NLGI 3 to 0 grades in the research report.
Features:
Specifications:
Applicable standards | ASTM D1264 |
Temp.control and display accuracy | ±0.1°C |
Working temperature | ambient~100°C |
Usual working temperature | 37.8 ± 0.1°C and 79 ± 0.1°C |
Rotating speed of motor with belt | 600 ± 30 rpm |
Flow rate of capillary | 5 ± 0.5 ml/s |
Total power consumption | 600W |
Powr supply | 220 V/50 Hz |