Home Companies Dongying Oilman Machinery Equipment Co.,Ltd.

API Mud Pump Bi-Metal Cylinder Liner For F800 / F1000 / F1300 / F1600

Contact Us

[China]

Trade Verify

Address: www.oilmanchina.com

Contact name:Christal

Dongying Oilman Machinery Equipment Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

API Mud Pump Bi-Metal Cylinder Liner For F800 / F1000 / F1300 / F1600

Country/Region	china
Categories	Other General Industrial Equipment

Product Details

API Mud Pump Bi-Metal Cylinder Liner For F800/F1000/F1300/F1600

The mud pump is the "heart" of the oilfield drilling system, and the cylinder liner is an important and easily worn component of the fluid end module of the mud pump. Therefore, the lifespan of the cylinder liner directly affects the mud pump. The working surface of the cylinder liner is in contact with high temperature and high-pressure gas, and there are piston rings that perform high-speed reciprocating motion on its surface. This determines that the cylinder liner not only needs sufficient strength and rigidity, but also must be resistant to high temperature, corrosion, and wear.

Bi-metal Cylinder Liner

Orchid Energy strictly controls the production of bimetallic cylinder liners within the tolerance range, ensuring easy installation, high inner liner smoothness, wear resistance, corrosion resistance, long service life, and suitability for various harsh working environments.

Outer sleeve: 45 # forged, tensile strength σ b> 610MPa, yield strength σ s> 450MPa, elongation § ＞ 17%, hardness HB180-200;

Inner sleeve: High chromium cast iron (centrifugal casting), annealing hardness HRC ≤ 40, quenching hardness HRC60-67.

No.	Types of liner	Introduction	Advantage
1	Ceramic Liner	Using advanced toughened zirconia material, its fracture toughness value can reach 10-15Mpa, bending strength is 600-800Mpa, and its wear resistance and corrosion resistance are excellent, suitable for various harsh well conditions	1. High strength, wear-resistant, corrosion-resistant, high-pressure resistant, and high-temperature resistant; 2. Low maintenance and labor costs; 3. Longer service life; 4. Reduce piston wear and loss;
2	Bimetal liner	Composed of a forged wear-resistant outer sleeve and a high chromium wear-resistant and corrosion-resistant inner sleeve. After inner sleeve treatment, the hardness can be increased by HRC64	1. High hardness and corrosion resistance; 2.No deformation, good surface smoothness;
3	Monometallic liner	The quenching thickness of the carbon layer in the inner hole of a monometallic cylinder liner can reach 1.5～1.8 mm, and the hardness can reach 58～60HRC	1. High hardness; 2. High surface smoothness;

Size of Liner (Metric)	90mm / 100mm / 110mm / 120mm / 130mm / 140mm / 150mm / 160mm / 170mm / 180mm
Size of Liner (Imperial)	4” / 4 1/2” / 5” 5 1/2” / 6” 6 1/4” / 6 1/2” / 6 3/4” / 7” / 7 1/2” / 8”
The types of mud pumps that Orchid Energy's cylinder liners can adapt	Emsco: F-350 / F-500 / F-650/ F-800 / F-1000/ F-1300 / F-1600
	Gardner Denver: TEE / PAH / PZ-7/ PZ-8 / PZ-9 / PZ-10 / PZ-11
	Ideco: T-500 / T-800 / T-1000 / T-1300 / T-1600
	NOV: 7-P-50 / 8-P-80 / 9-P-100/ 10-P-130 / 12-P-160 / 14-P-220
	Oilwell: A-850-PT / A-1100-PT / A-1400-PT / A-1700-PT
	Bomco: F-500 / F-800 / F-1000/ F-1300 / F-1600/ F-2200HL
	Wirth: TPK 1000 / TPK 1300 / TPK 1600/ TPK 2000 / TPK 2200
	Aplex: SC -170L / SC-230 / SC-300
	Russia Pump: UNB600 / UNBT950 / UNBT950 / UNBT1180