Active Member
|
[China]
Address: Fucaolou Town East 3000 Meters Northbound, Taikang County, Henan Province, China
Contact name:Wang
Taikang Yinyu Boiler Manufacturing Co., Ltd |
|
|
8t Environment Protection Fully Automatic Oil Fired Gas Fired Hot Water Boiler
The difference between a hot water boiler under constant pressure
and a pressure hot water boiler
(1) The boiler of the pressure hot water boiler heating system is a
pressurized equipment, which has the risk of explosion. And the
regular pressure hot water boiler heating system boiler does not
pressure, always connected with the atmosphere, so, the boiler in
any case will not explode, good safety performance.
(2) Pressure hot water boiler is full of water, there is no water
level control problem. The normal pressure hot water boiler has
water level control problem. It is the boiler with water in the
pot, the top is still connected with an open box, and there is
still a water level control problem.
(3) Pressure hot water boiler must be equipped with pressure gauge,
safety valve and thermometer, because the boiler is always in a
full state, so there is no water meter, and the regular pressure
hot water boiler only water level meter and thermometer, because
the boiler and the atmosphere, the pressure in the pot is always
atmospheric pressure, there is no risk of explosion, so there is no
need to install a safety valve, can also be installed pressure
gauge.
(4) The special pump of the hot water boiler heating system under
pressure is the return water of the pumping system to the boiler,
and the water pump is generally selected. It should not only
overcome the system circulation resistance, but also maintain the
boiler has a certain pressure, to ensure that the pot water does
not vaporize at high temperature. The circulating water pump of the
hot water boiler heating system is pumping from the boiler, the
pump is the hot water pump, its function is to overcome the system
resistance, mainly to overcome the resistance of the backwater
control valve.
(5) Pressure hot water boiler can supply low temperature water, but
also high temperature water. The normal pressure hot water boiler
can only supply less than 100 degrees C of low-temperature water.
Part of product paremeters
CWNS5.6-95/70
| NO; | Name | Unit | Number | Description |
| 1 | Rated efficiency | MW | 5.6 | |
| 2 | Water volume | M³ | 3.75 | |
| 3 | Rated outlet/inlet water temperature | ℃ | 95/70 | |
| 4 | Heating efficiency | % | 99 | |
| 5 | Output/inlet diameter | mm | DN125 | |
| 6 | Design fuels | / | Oil/Gas | |
| 7 | Blow down valve diameter | mm | DN133 | |
| 8 | Heating area(room) | ㎡ | 12500 | |
| 9 | Hot water output | M³/h | 36 | |
| 10 | Bulk size | mm | 8000×2400×3000 |
Pre-sale service:
We help customer choose the best boiler model according to
different requirements of various industry. Before delivery we
will provide foundation drawing, layout drawing, boiler room
layout, etc.
In-sale service:
We keep 24 hours online and keep close contacts during the
production process to ensure on time delivery with perfect
finished product.
After-sale service:
1.provide full range of original spare parts.
2.Engineers abroad installation and commissioning service is
available.
3.Our engineers will held a training for boiler workers to
ensure the safe operation.
4.Free maintenance and repair for one year and lifelong
service.
Boiler application areas
