|
[China]
Trade Verify
Address: CN , Guangdong , Shenzhen , Floor 501, Building P, No. 17, Chuangxin Industrial Park, Xintian Community, Guanhu Street, Longhua District
Contact name:Andy Lee
Shenzhen Sinoseen Technology Co., Ltd |
|
Verified Suppliers
|
|
|
USB Camera Module 4K
This is one of our 4K camera module, it is 8MP (3840x2160)
resolution with Samsung 3H7 CMOS sensor, image quality is quite
excellent and stable. The biggest advantage of this camera module
is that it supports 30FPS high frame rate at full resolution 8MP
(3840x2160), while most of other 8MP sensor can only support 15FPS
frame rate at 8MP
Model No | SNS-8MP-3H7-V1.0 |
Sensor | 1/2.5’’ Samsung 3H7 CMOS |
Pixel | 8 Mega Pixel |
Most effective pixels | 3264(H) x 2448(V) |
Pixel Size | 1.4µm x 1.4µm |
Image area | 3864um (H) x 2196um (V) |
Compression format | MJPEG / YUV2 (YUYV) |
Resolution & Frame rate | See above |
Shutter Type | Electronic rolling shutter |
Focus type | Fixed focus |
Chroma | Color, RGB |
Clock Frequency | 6 to 72 MHz |
Microphones | Built-in |
Interface type | USB2.0 |
Adjustable parameter | Brightness/Contrast/Color saturation/Hue/Definition/Gamma/White balance/Exposure |
| Focal length: 3.6mm |
Lens construction: 5E+IR | |
H FOV: 90 degree | |
Thread Size: M12*P0.5 | |
Audio frequency | Optional |
Power supply | USB BUS POWER |
Operating Voltage | DC 5V |
Operating Current | 260mA |
Main chip | DSP/SENSOR/FLASH |
Auto Exposure Control (AEC) | Support |
Auto White Balance (AEB) | Support |
Auto Gain Control (AGC) | Support |
Dimension | Customizable |
Storage temperature | -20°C to 70°C |
Operating temperature | 0°C to 60°C |
USB cable length | Default |
| WinXP/Vista/Win7/Win8/Win10 |
Shenzhen Sinoseen Technology Co.,Ltd
China top 10 camera module manufacturer
We customize all kinds of USB/MIPI/DVP camera module as per your request
FAQ:
Q1. How to choose the right camera module?
A: Please tell us your specific needs, such as application
scenarios, resolution, size, and lens requirements. We will have a
professional team of engineers to assist you in choosing the most
suitable camera module.
Q2. How to start proofing?
A: After confirming all the parameters, we will draw a drawing to
confirm the details with you. Once the drawing is confirmed, we
will arrange a proofing.
Q3: How do I send the payment?
A: Currently we accept T/T bank transfer and Paypal.
Q4: How long does it take to make a sample?
A: If it is a USB camera module, it usually takes 2-3weeks, if it
is a MIPI or DVP camera module, it usually takes 10-15days.
Q5: How long will it take to receive the sample after it is ready?
A: After the samples have been tested and there is no problem, we
will send the samples to you via DHL FedEx UPS or any other courier
methods, usually within a week.
