Active Member
|
[China]
Address: Room 305,Changsha International Commerical center, Changsha Hi-tech Industry Zone, Changsha ,Hunan
Contact name:Aaron Xiang
Hunan Hi-soon Supply Chain Co. |
|
|
These batteries differ from normal Lexus RX450Hand other Lexus hybrid vehicle modules. They carry an 15 cells 19.2 V module system which are compactly built in 3 different casings. Each casing is rivetted together, and is not as easily accessible. Did you know that your Lexus RX 450H Hybrid Battery is under the rear seat of your RX 450H. Our professional manufacturing is careful ensuring that your interior is reassembled in the exact condition it was before the repair. We are meticulous and clean during our hybrid battery installation to ensure that you only have a positive experience when you use our replacement.
Tests should be done within one month of receiving the goods under the following conditions.
Test condition
Temperature:20±5℃
Relative Humidity:65±20%
Atmospheric Pressure:86～106kPa
Standard charge discharge specification
Discharge: 6000mA (1C) to 168.0V
Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs
Discharge: 6000mA (1C) to 12.0V
This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,
Model: Hyno RX450H 288
Suitable for: Lexus RX450H (2010-).
RATINGS
| No. | Description | Unit | Specification | Condition |
| 1 | Nominal Voltage | V | 288 | |
| 2 | Operating Voltage | V | 204.0～326.4 | |
| 3 | Nominal capacity | mAh | 6500 | Standard charge / discharge |
| 4 | Minimum capacity | mAh | 6000 | Standard charge / discharge |
| 5 | Nominal Energy | Wh | 1728 | 1 hour rate |
| 6 | Weight | Kg | 35±0.1 | Standard environment,Accuracy±0.05g Electronic scale |
| 7 | Power Density | W/kg | ＞850 | |
| 8 | Energy Density | Wh/kg | ＞43 | |
| 9 | Max. continuous discharge current | C | 20 | 20℃～45℃ |
| 10 | Max. continuous charge current | C | 15 | |
| 11 | Storage Temperature | ℃ | -20～35 | |
| 12 | Operating Temperature | ℃ | -30～55 |
| No. | Test | Unit | Description | Condition | Note |
| 1 | Open circuit voltage (OCV) | V | ≥15 | Within 1h after charging | |
| 2 | Internal resistance (DC-IR) | mΩ | ≤32 | 50%SOC | |
| 3 | Internal Impedance (AC-IR) | mΩ | ≤14.2 | 1kHz | |
| 4 | Self -discharge rate | % | ＜18 | 55±2℃ rest 3days, 20±2℃ rest 7days | |
| 5 | Energy Efficiency | % | ≥85 | 25℃ | |
| 6 | Volumetric Efficiency | % | ＞95 | 25℃ | |
| 7 | Cycle Life | Week | ＞3000 | 80%DOD | Charge to 90%, discharge to 10% |
Product fabrication and material defects are guaranteed within 2 years.
Recommendations: the company's products have been filled 30-90% power in the factory, depending on the shipping distance and packing conditions. When capacity measurement, discharge with 1C to 12.6V/ stick; then charge/discharge with the specified current to test capacity. If the stock reach or exceed 2 months, discharge with 1C to 14.4V/ stick; Then charge with 1C for 54min, 0.2C charge for 1hrs, rest 20min, discharge with 1C to 12.6V/ stick, after 3 cycles; Then charge/discharge with the specified current to test capacity.
For the first use, the standard charge method is recommended to avoid damage to the battery.
When charging the battery, please charge in accordance with the charging method in the product specification. Use the specified charger in the specified temperature range. Do not reverse charge, do not exceed the required charging current, and do not exceed the required charging time. Do not charge only with limited voltage and limited current
Hunan Hi-soon Supply Chain Co., Ltd reserves the right to change and revise Product specification without any advance notice.
