TOBO STEEL GROUP CHINA |
Verified Suppliers
|
|
Carbon Steel Welded Flanges/Forged Butt Welded Flanges/Flanges/Flanges/Flanges PN25 DN100
Flange with neck butt ring loose sleeve
Loose flange welding ring loose sleeve neck flange, welding ring
loose sleeve plate flange, flat welding ring loose sleeve plate
flange, plate turned loose sleeve flange, in addition, in order to
meet the needs of the device after locking, there are holes in the
rod, these holes can make the bolt vibration not to loose. Some
flange bolts without thread smooth rod to be made thin, called thin
rod flange bolts. This flange bolt is conducive to the connection
of variable force. There are special high-strength bolts on the
steel structure, the head will be larger, and the size will change.
Hot dip galvanized round steel is to make the molten metal react
with the iron matrix to produce an alloy layer.
Flat welded ring loose flange (PJ/SE)
Flat welding ring loose sleeve flange is a movable flange piece,
which is generally matched with water supply and drainage
accessories (the most common on the expansion joint). When the
manufacturer leaves the factory, both ends of the expansion joint
have a flange, which is directly connected with the pipeline and
equipment in the project with bolts. The purpose of using flat
welding ring loose flange is generally to save material, the
structure is divided into two parts, the pipe part of a head and
pipe connection, a made flanging, flange part set in the flanging
edge. Flanges are made of low grade material, while pipes are made
of the same material as pipes to save material.
Flat welded ring loose flange:
1. Cost saving. When the pipe material is special and expensive,
the cost of welding the flange of the same material is high.
2. It is not convenient for welding or processing or the strength
required is large. Be like plastic tube, glass steel tube and so
on.
3, easy to construction. For example, the flange bolt holes are not
easy to be aligned during connection or prevent the flange bolt
holes from changing after replacement.