|
[China]
Trade Verify
Address: Shatian Town, Dongguan City, Gaungdong Province, China, postal code 523991,(near Shenzhen & Guangzhou)
Contact name:Marco
ACE MACHINERY CO.,LIMITED |
|
Verified Suppliers
|
|
|
Application
This ACE-TNM-2L-4H High Speed Paper Napkin Folder Machine For 1/6 Tall-Fold Tork Table Dispenser Napkin is mainly used to automatically fold, emboss, printing, cutting, packing and counting z fold paper napkin, 1/4 fold table napkins, cocktail napkin, hotel napkins, restaurant napkins, beverage napkin, lunchen napkin, 1/6 fold tallfold dispenser napkin, wallet tissue, custom airlaid nonwoven napkins and MG paper napkins etc.
Advantage:
1 Taiwan design napkin machinery
2 High speed up to 5200 sheet/min, depends on multi napkin sizes.
3 the napkin machinery is with 4 decks output.
4 Fastest in China mainland now.
5 paper napkin machine can make multi sizes 33x33cm & 33x16.5cm or customized.
Technical parameters as below
| Napkin open size(mm) | 200*200 | 240*240 | 250*250 | 300*300 | 330*330 | 400*400 | Other sizes to be customized |
| Napkin folded size (mm) | 100*100 | 120*120 | 125*125 | 150*150 | 165*165 | 200*200 | |
| Jumbo roll width (mm) | 1200 | 1440 | 1500 | 1800 | 1980 | 2400 | |
| Raw material | Tissue paper and nonwoven airlaid and MG paper. | ||||||
| Output format | two decks (four dekcs) napkin machine eight lines napkin machine | ||||||
| Machine speed | Up to 5200 sheet/min, depends on multi napkin sizes. | ||||||
| Folding type | 1/4 quarter fold 1/2 no fold / flat sheet/ single sheet. 1/6 tall fold dispenser fold 1/8 1/12 V fold Single flat sheet or custom folding style. Mechanical fold with bandsaw cutting | ||||||
| Embossing system | Full embossing or side edge border embossing. Steel to paper(wool coated) steel to rubber steel to steel steel to mirror | ||||||
| Printing system | 2 to 4 colors printing. | ||||||
| Control | PLC, Frequency conversion speed control Automatic paper break detection JOG Emergency stop Alarm system. | ||||||
| Power supply | About 7.5kg 3phase 380v 50hz or 3phase 220v 60hz or 480v | ||||||
| Machine weight | 6000kg | ||||||
| Machine size | 6*1.5*2.4m | ||||||
A. back stand
1. Parent roll specification: 16-75g/m2 1-ply; 13-18gsm 2 plies
tissue paper and nonwoven airlaid and MG paper. Or customized.
2. Parent roll size: ≤1500mm x1800mm.( 300mm*6lanes = 1800mm.)
Diameter x Width
4. Unwind belt for the parent roll to be on top of the roll instead
of the bottom
5. The parent roll is driven by an independent motor. NOT belts.
6. Thickened steel wallboard structure to reduce vibration while
running high speed running.
D. Folding Section
1. Napkin sizes. Other sizes available. Please contact us.
Open size: 300x300mm
Folded size: 150x150mm
Cutoff size: about 300mm.
2. Folder type: mechanical folding type, 1/4 quarter fold type.
3. Synchronizer for feeding paper
4. The gap and distance between two folding rollers can be
adjustable to fit for different paper gsm and thickness.
5. With 3 sets of slitting blades.
6. With double decks four lines output delivery. (Double decks
available)
7. Capacity: About 300m/min, about 1000sheet/min/lane * 4lanes = 4000
sheet/min total, depending on paper quality, gsm and workers operation.
8. With automatic counting unit, every count 1 - 99999 sheet/count.
With tissue pop up every count.
12. Can be designed to make both 1/4 quarterfold napkins and 1/6
tall-fold napkins.(Need customized and both 1/4 and 1/6 must have
same cutoff size.)
13. Driven by an independent motor. NOT chains or belts.
C. Embossing Section
1. With 1 set of steel to paper embossing unit. (Embossing pattern
provided by client or recommend by us)
2. Embossing tension is adjustable.
6. Driven by an independent motor. NOT Chains or belts.
7. Thickened steel wallboard structure to reduce vibration while
running high speed running..
D. Important parts:
1. Taiwan DELTA Inverter. Much easier for operation. (Other companies use only buttons and even all inferior buttons, easy to damage. And they use Elctromagnetic speed control, easy to get broken.)
2. Japan Omron sensors for detecting paper break. (Other companies use inferior brands)
8. Stronger structure and better quality parts than others. Complete thickened wallboard steel plate structure to ensure high speed running, no vibration.
Products made by this High Speed Paper Napkin Folder Machine For 1/6 Tall-Fold Tork Table Dispenser Napkin:
FAQ
Q: Are you trading company or manufacturer
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 60-90 days if the goods are not in stock, it is according to quantity.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
