Durable FFP1V Disposable Asbestos Mask , P1 Disposable Respirator High Efficiency

Durable FFP1V Disposable Asbestos Mask , P1 Disposable Respirator High Efficiency

1 . Descriptions :

FFP1V mask is light and comfortable. The internal nosepiece is made of velvet/sponge double-layer. There are no exposed metal components; the external nosepiece used to adjust the mask on the face is metal coated. Structure and materials are long lasting and avoid the collapse in humid environments.Have filter efficiency level of 80%.

2 . Fearture:

1. Made of environmental friendly material, moisture-proof, non-toxic, non-irritating, soft and comfortable.
2. Breathable material and cute patterns, which makes it useful and fashionable.
3. Special non-woven design, provides protections against dust, automobile exhaust, pollen, etc.
4. Perfect design, when you wear it , it fits seamlessly into your face. Elastic ear loop is easy to wear and no pressure to the ears.
5. Perfect for nail salon or any other areas where protection might be required, such as airplane, etc.

3 . Mask CE Quality Standards

• This product has been tested according to the following European Standard:
• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.
• It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.
• The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product
• checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4 . Directions for use

• Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
• Hold respirator under chin,with nose piece up
• Locate the upper strap across the crown of the head and the lower strap below the ears.
• Strap must not be twisted
• Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
• The seal of the respirator on the face should be fit-checked before entering the workplace.

• If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.

5 . Expiry date and packing 

If maintained as per storage instructions, product can be used up to 5 years from date of manufactory.

Normal Packing12pcs/box, 240pcs/ ctn