Polypropylene Carbon Filter Dust Mask Lightweight With Two Head -
Straps
1 . Descriptions
【Optimal Comfort】A comfortable elastic headband, adjustable nose
bridge and single strap construction provide a secure, customized
fit; one size fits most faces.
【Breathable and Lightweight】 Professional particulate respirators
are breathable and offer a good ventilation. Soft sponge nose pad
provides superior breathability and ensures the wearing comfort.
【Widely Used】Breathing respirator offers an effective protection
from pandemic virus, infections and other biological particles. Air
filter mask is useful for daily life, prevents dust, dust storms,
powder input to the respiratory system and mouth.
【Easy to Breath】Incorporates proprietary technology with advanced
electrostatically charged microfiber filter media, designed for
easy breathing.
2 . Feature
- Made of multi-layered nonpoisonous, non-allergic, non-stimulating
materials.
- Adjust the bandage strip and built-in foam cushion to adapt to
various face-shapes with comfortable sealing.
- Application: use for construction, mining, textile.
3 . Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
- EN149: 2001 +A1: 2009. Respiratory protective
devices. Filtering half masks to protect against particles.
Requirements, testing, marking.It complies with European Regulation
(EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by
BSI , notified body n°0086.The PPE is subject to the conformity
assessment procedure based on internal production control plus
supervised product checks at random intervals (Module C2) set
out in Annex VII under surveillance of BSI , notified body n°0086.
4 . How to use?
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
5. Warning
- The user should be trained in the fitting and should be aware of
the instructions for using prior to donning the respirator.
- Use in adequately ventilated areas,which are not deficiency of
oxygen.
- Do not use this respirator when oxygen concentration is less than
19.5%.
- Do not use the mask in explosive environment.
- The mask must be fitted correctly to ensure the level of protection
expected is achieved.
- The facila hairs or heards and certain facial charactrtistics may
reduce the effectiveness of the mask.
- For mask mark marked “NR”,the particle filtering half mask shall
not be used for more than one shift.