Single Use FFFP1V Dust Respirator Mask Lightweight No Exposed Metal
Components
Descriptions :
FFP1V mask is light and comfortable. The internal nosepiece is made
of velvet/sponge double-layer. There are no exposed metal
components; the external nosepiece used to adjust the mask on the
face is metal coated. Structure and materials are long lasting and
avoid the collapse in humid environments.Have filter efficiency
level of 80%.
The respirators are designed to offer protection against nuisance
airborne particles which can be deleterious to health!
To assist with the health benefits, the respirators are
manufactured with comfort in mind, to encourage workers in
potentially harmful environments to wear them for longer.
Therefore, careful selection of the correct respirator means that
workers can wear them with ease, securing their protection whenever
they are exposed to risk. This helps to safeguard the welfare of
workers, while also ensuring that workplaces remain compliant.
Advantages
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.
Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
Mask CE Quality Standards
CE Standard for Disposable Respirators |
EN: 149:2001 + A1:2009 |
Distinguish | Filter Efficiency | Penetration | Resistant |
FFP1 NR | ≧80% | < 20% | < 21mmH2O |
FFP2 NR | ≧94% | < 5% | < 24mmH2O |
FFP3 NR | ≧99% | < 1% | < 30mmH2O |
- This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.
- It complies with European Regulation (EU) 2016/425 on Personal
Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.
- The PPE is subject to the conformity assessment procedure based on
internal production control plus supervised product
- checks at random intervals (Module C2) set out in Annex VII under
surveillance of BSI , notified body n°0086.